点击或拖拽改变大小

NetworkDeviceBase 方法

NetworkDeviceBase 类型公开以下成员。

方法
  名称说明
受保护的方法AccountCertificate
认证账号,根据已经设置的用户名和密码,进行发送服务器进行账号认证。
Authentication account, according to the user name and password that have been set, sending server for account authentication.
(继承自 NetworkDoubleBase。)
受保护的方法AccountCertificateAsync
认证账号,根据已经设置的用户名和密码,进行发送服务器进行账号认证。
Authentication account, according to the user name and password that have been set, sending server for account authentication.
(继承自 NetworkDoubleBase。)
受保护的方法CheckReceiveDataComplete
检查当前从网口接收的数据是否是完整的,如果是完整的,则需要返回 True,表示数据接收立即完成,默认返回 True
Check whether the data currently received from the network port is complete, and if it is complete, you need to return True, indicating that the data reception is completed immediately, and the default value is True
(继承自 NetworkDoubleBase。)
受保护的方法CheckRemoteToken
检查当前的头子节信息的令牌是否是正确的,仅用于某些特殊的协议实现
Check whether the token of the current header subsection information is correct, only for some special protocol implementations
(继承自 NetworkBase。)
公共方法代码示例ConnectClose
手动断开与远程服务器的连接,如果当前是长连接模式,那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode
(继承自 NetworkDoubleBase。)
公共方法代码示例ConnectCloseAsync
手动断开与远程服务器的连接,如果当前是长连接模式,那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode
(继承自 NetworkDoubleBase。)
公共方法代码示例ConnectServer
尝试连接远程的服务器,如果连接成功,就切换短连接模式到长连接模式,后面的每次请求都共享一个通道,使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.
(继承自 NetworkDoubleBase。)
公共方法代码示例ConnectServer(AlienSession)
使用指定的套接字创建异形客户端,在异形客户端的模式下,网络通道需要被动创建。
Use the specified socket to create the alien client. In the alien client mode, the network channel needs to be created passively.
(继承自 NetworkDoubleBase。)
公共方法ConnectServer(MqttClient, String, String)
使用一个MQTT中转服务器来连接设备对象,并进行相关的读取操作
(继承自 NetworkDoubleBase。)
公共方法代码示例ConnectServerAsync
尝试连接远程的服务器,如果连接成功,就切换短连接模式到长连接模式,后面的每次请求都共享一个通道,使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.
(继承自 NetworkDoubleBase。)
受保护的方法代码示例CreateSocketAndConnect(String, Int32)
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnect(IPEndPoint, Int32, IPEndPoint)
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnect(String, Int32, Int32)
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(String, Int32)
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(IPEndPoint, Int32, IPEndPoint)
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(String, Int32, Int32)
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法DecideWhetherQAMessage
决定当前的消息是否是应答机制的消息内容,需要在客户端进行重写实现,如果是应答机制,返回 True, 否则返回 False
To determine whether the current message is the message content of the response mechanism, it needs to be rewritten on the client side. If it is the response mechanism, return True, otherwise return False
(继承自 NetworkDoubleBase。)
受保护的方法DeleteFileByName
删除一个指定的文件,如果文件不存在,直接返回 True,如果文件存在则直接删除,删除成功返回 True,如果发生了异常,返回False
Delete a specified file, if the file does not exist, return True directly, if the file exists, delete it directly, if the deletion is successful, return True, if an exception occurs, return False
(继承自 NetworkBase。)
公共方法Dispose
释放当前的资源,如果调用了本方法,那么该对象再使用的时候,需要重新实例化。
Release the current resource. If this method is called, the object needs to be instantiated again when it is used again.
(继承自 NetworkDoubleBase。)
受保护的方法Dispose(Boolean)
释放当前的资源,并自动关闭长连接,如果设置了的话
(继承自 NetworkDoubleBase。)
公共方法Equals (继承自 Object。)
受保护的方法ExtraAfterReadFromCoreServer
和服务器交互完成的时候调用的方法,可以根据读写结果进行一些额外的操作,具体的操作需要根据实际的需求来重写实现
The method called when the interaction with the server is completed can perform some additional operations based on the read and write results. The specific operations need to be rewritten according to actual needs.
(继承自 NetworkDoubleBase。)
受保护的方法代码示例ExtraOnDisconnect
根据实际的协议选择是否重写本方法,有些协议在断开连接之前,需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.
(继承自 NetworkDoubleBase。)
受保护的方法代码示例ExtraOnDisconnectAsync
根据实际的协议选择是否重写本方法,有些协议在断开连接之前,需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.
(继承自 NetworkDoubleBase。)
受保护的方法Finalize (继承自 Object。)
受保护的方法GetAvailableSocket
获取本次操作的可用的网络通道,如果是短连接,就重新生成一个新的网络通道,如果是长连接,就复用当前的网络通道。
Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused.
(继承自 NetworkDoubleBase。)
受保护的方法GetAvailableSocketAsync
获取本次操作的可用的网络通道,如果是短连接,就重新生成一个新的网络通道,如果是长连接,就复用当前的网络通道。
Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused.
(继承自 NetworkDoubleBase。)
公共方法GetHashCode (继承自 Object。)
受保护的方法GetNewNetMessage
获取一个新的消息对象的方法,需要在继承类里面进行重写
The method to get a new message object needs to be overridden in the inheritance class
(继承自 NetworkDoubleBase。)
公共方法GetPipeSocket
获取当前用于通信的管道信息
Get the current pipe information used for communication
(继承自 NetworkDoubleBase。)
公共方法GetType (继承自 Object。)
受保护的方法GetWordLength
一个字单位的数据表示的地址长度,西门子为2,三菱,欧姆龙,modbusTcp就为1,AB PLC无效
The address length represented by one word of data, Siemens is 2, Mitsubishi, Omron, modbusTcp is 1, AB PLC is invalid
受保护的方法代码示例InitializationOnConnect
根据实际的协议选择是否重写本方法,有些协议在创建连接之后,需要进行一些初始化的信号握手,才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.
(继承自 NetworkDoubleBase。)
受保护的方法代码示例InitializationOnConnectAsync
根据实际的协议选择是否重写本方法,有些协议在创建连接之后,需要进行一些初始化的信号握手,才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.
(继承自 NetworkDoubleBase。)
公共方法IpAddressPing
对当前设备的IP地址进行PING的操作,返回PING的结果,正常来说,返回Success
PING the IP address of the current device and return the PING result. Normally, it returns Success
(继承自 NetworkDoubleBase。)
受保护的方法MemberwiseClone (继承自 Object。)
公共方法PackCommandWithHeader
对当前的命令进行打包处理,通常是携带命令头内容,标记当前的命令的长度信息,需要进行重写,否则默认不打包
The current command is packaged, usually carrying the content of the command header, marking the length of the current command, and it needs to be rewritten, otherwise it is not packaged by default
(继承自 NetworkDoubleBase。)
公共方法Read(String, UInt16)
批量读取字节数组信息,需要指定地址和长度,返回原始的字节数组
Batch read byte array information, need to specify the address and length, return the original byte array
公共方法代码示例ReadT
读取支持Hsl特性的数据内容,该特性为HslDeviceAddressAttribute,详细参考api文档说明
Read the data content of the Hsl attribute. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details.
公共方法ReadAsync(String, UInt16)
异步批量读取字节数组信息,需要指定地址和长度,返回原始的字节数组
Asynchronous batch read byte array information, need to specify the address and length, return the original byte array
公共方法代码示例ReadAsyncT
异步读取支持Hsl特性的数据内容,该特性为HslDeviceAddressAttribute,详细参考api文档说明
Asynchronously read the data content of the Hsl attribute. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details.
公共方法ReadBool(String)
读取单个的Boolean数据信息
Read a single Boolean data message
公共方法ReadBool(String, UInt16)
批量读取Boolean数组信息,需要指定地址和长度,返回Boolean 数组
Batch read Boolean array information, need to specify the address and length, return Boolean array
公共方法ReadBoolAsync(String)
异步读取单个的Boolean数据信息
Asynchronously read a single Boolean data message
公共方法ReadBoolAsync(String, UInt16)
异步批量读取Boolean数组信息,需要指定地址和长度,返回Boolean 数组
Asynchronously batch read Boolean array information, need to specify the address and length, return Boolean array
公共方法代码示例ReadCustomerT(String)
读取自定义的数据类型,需要继承自IDataTransfer接口,返回一个新的类型的实例对象。
To read a custom data type, you need to inherit from the IDataTransfer interface and return an instance object of a new type.
公共方法代码示例ReadCustomerT(String, T)
读取自定义的数据类型,需要继承自IDataTransfer接口,传入一个实例,对这个实例进行赋值,并返回该实例的对象。
To read a custom data type, you need to inherit from the IDataTransfer interface, pass in an instance, assign a value to this instance, and return the object of the instance.
公共方法代码示例ReadCustomerAsyncT(String)
读取自定义的数据类型,需要继承自IDataTransfer接口,返回一个新的类型的实例对象。
To read a custom data type, you need to inherit from the IDataTransfer interface and return an instance object of a new type.
公共方法代码示例ReadCustomerAsyncT(String, T)
读取自定义的数据类型,需要继承自IDataTransfer接口,传入一个实例,对这个实例进行赋值,并返回该实例的对象。
To read a custom data type, you need to inherit from the IDataTransfer interface, pass in an instance, assign a value to this instance, and return the object of the instance.
公共方法代码示例ReadDouble(String)
读取双浮点的数据
Read double floating point data
公共方法代码示例ReadDouble(String, UInt16)
读取双浮点数据的数组
Read double floating point data array
公共方法代码示例ReadDoubleAsync(String)
异步读取双浮点的数据
Asynchronously read double floating point data
公共方法代码示例ReadDoubleAsync(String, UInt16)
异步读取双浮点数据的数组
Asynchronously read double floating point data array
公共方法代码示例ReadFloat(String)
读取单浮点数据
Read single floating point data
公共方法代码示例ReadFloat(String, UInt16)
读取单浮点精度的数组
Read single floating point array
公共方法代码示例ReadFloatAsync(String)
异步读取单浮点数据
Asynchronously read single floating point data
公共方法代码示例ReadFloatAsync(String, UInt16)
异步读取单浮点精度的数组
Asynchronously read single floating point array
公共方法代码示例ReadFromCoreServer(Byte)
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.
(继承自 NetworkDoubleBase。)
公共方法ReadFromCoreServer(IEnumerableByte) (继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServer(Byte, Boolean, Boolean)
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.
(继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServer(Socket, Byte, Boolean, Boolean)
将数据报文发送指定的网络通道上,根据当前指定的INetMessage类型,返回一条完整的数据指令
Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type
(继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServerAsync(Byte)
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.
(继承自 NetworkDoubleBase。)
公共方法ReadFromCoreServerAsync(IEnumerableByte) (继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServerAsync(Byte, Boolean, Boolean)
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.
(继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServerAsync(Socket, Byte, Boolean, Boolean)
将数据报文发送指定的网络通道上,根据当前指定的INetMessage类型,返回一条完整的数据指令
Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type
(继承自 NetworkDoubleBase。)
公共方法代码示例ReadInt16(String)
读取16位的有符号的整型数据
Read 16-bit signed integer data
公共方法代码示例ReadInt16(String, UInt16)
读取16位的有符号整型数组
Read 16-bit signed integer array
公共方法代码示例ReadInt16Async(String)
异步读取16位的有符号的整型数据
Asynchronously read 16-bit signed integer data
公共方法代码示例ReadInt16Async(String, UInt16)
异步读取16位的有符号整型数组
Asynchronously read 16-bit signed integer array
公共方法代码示例ReadInt32(String)
读取32位的有符号整型
Read 32-bit signed integer
公共方法代码示例ReadInt32(String, UInt16)
读取32位有符号整型数组
Read 32-bit signed integer array
公共方法代码示例ReadInt32Async(String)
异步读取32位的有符号整型
Asynchronously read 32-bit signed integer
公共方法代码示例ReadInt32Async(String, UInt16)
异步读取32位有符号整型数组
Asynchronously read 32-bit signed integer array
公共方法代码示例ReadInt64(String)
读取64位的有符号整型
Read 64-bit signed integer
公共方法代码示例ReadInt64(String, UInt16)
读取64位的有符号整型数组
Read 64-bit signed integer array
公共方法代码示例ReadInt64Async(String)
异步读取64位的有符号整型
Asynchronously read 64-bit signed integer
公共方法代码示例ReadInt64Async(String, UInt16)
异步读取64位的有符号整型数组
Asynchronously read 64-bit signed integer array
受保护的方法ReadStream
读取流中的数据到缓存区,读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.
(继承自 NetworkBase。)
受保护的方法ReadStreamAsync
读取流中的数据到缓存区,读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.
(继承自 NetworkBase。)
公共方法代码示例ReadString(String, UInt16)
读取字符串数据,默认为最常见的ASCII编码
Read string data, default is the most common ASCII encoding
公共方法代码示例ReadString(String, UInt16, Encoding)
使用指定的编码,读取字符串数据
Reads string data using the specified encoding
公共方法代码示例ReadStringAsync(String, UInt16)
异步读取字符串数据,默认为最常见的ASCII编码
Asynchronously read string data, default is the most common ASCII encoding
公共方法代码示例ReadStringAsync(String, UInt16, Encoding)
异步使用指定的编码,读取字符串数据
Asynchronously reads string data using the specified encoding
公共方法代码示例ReadStructT
读取结构体类型的数据,根据结构体自身的定义,读取原始字节数组,然后解析出实际的结构体数据,结构体需要实现HslStructAttribute特性
公共方法代码示例ReadStructAsyncT
读取结构体类型的数据,根据结构体自身的定义,读取原始字节数组,然后解析出实际的结构体数据,结构体需要实现HslStructAttribute特性
公共方法代码示例ReadUInt16(String)
读取16位的无符号整型
Read 16-bit unsigned integer
公共方法代码示例ReadUInt16(String, UInt16)
读取16位的无符号整型数组
Read 16-bit unsigned integer array
公共方法代码示例ReadUInt16Async(String)
异步读取16位的无符号整型
Asynchronously read 16-bit unsigned integer
公共方法代码示例ReadUInt16Async(String, UInt16)
异步读取16位的无符号整型数组
Asynchronously read 16-bit unsigned integer array
公共方法代码示例ReadUInt32(String)
读取32位的无符号整型
Read 32-bit unsigned integer
公共方法代码示例ReadUInt32(String, UInt16)
读取32位的无符号整型数组
Read 32-bit unsigned integer array
公共方法代码示例ReadUInt32Async(String)
异步读取32位的无符号整型
Asynchronously read 32-bit unsigned integer
公共方法代码示例ReadUInt32Async(String, UInt16)
异步读取32位的无符号整型数组
Asynchronously read 32-bit unsigned integer array
公共方法代码示例ReadUInt64(String)
读取64位的无符号整型
Read 64-bit unsigned integer
公共方法代码示例ReadUInt64(String, UInt16)
读取64位的无符号整型的数组
Read 64-bit unsigned integer array
公共方法代码示例ReadUInt64Async(String)
异步读取64位的无符号整型
Asynchronously read 64-bit unsigned integer
公共方法代码示例ReadUInt64Async(String, UInt16)
异步读取64位的无符号整型的数组
Asynchronously read 64-bit unsigned integer array
受保护的方法Receive(SslStream, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(Socket, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAndCheckBytes
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends
(继承自 NetworkBase。)
受保护的方法ReceiveAndCheckBytesAsync
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(SslStream, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(Socket, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveByMessage
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法ReceiveByMessageAsync
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法ReceiveBytesContentFromSocket
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveBytesContentFromSocketAsync
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of byte data from the network. If the