点击或拖拽改变大小

NetworkUdpBase 类

基于Udp的应答式通信类
Udp - based responsive communication class
继承层次

命名空间:  HslCommunication.Core.Net
程序集:  HslCommunication (在 HslCommunication.dll 中) 版本:11.8.2.0 (11.8.2.0)
语法
public class NetworkUdpBase : NetworkBase

NetworkUdpBase 类型公开以下成员。

构造函数
  名称说明
公共方法NetworkUdpBase
实例化一个默认的方法
Instantiate a default method
Top
属性
  名称说明
公共属性ConnectionId
当前连接的唯一ID号,默认为长度20的guid码加随机数组成,方便列表管理,也可以自己指定
The unique ID number of the current connection. The default is a 20-digit guid code plus a random number.
公共属性代码示例IpAddress
获取或是设置远程服务器的IP地址,如果是本机测试,那么需要设置为127.0.0.1
Get or set the IP address of the remote server. If it is a local test, then it needs to be set to 127.0.0.1
公共属性LocalBinding
获取或设置绑定的本地的IP地址和端口号信息,如果端口设置为0,代表任何可用的端口
Get or set the bound local IP address and port number information, if the port is set to 0, it means any available port
公共属性代码示例LogNet
组件的日志工具,支持日志记录,只要实例化后,当前网络的基本信息,就以DEBUG等级进行输出
The component's logging tool supports logging. As long as the instantiation of the basic network information, the output will be output at DEBUG
(继承自 NetworkBase。)
公共属性代码示例Port
获取或设置服务器的端口号,具体的值需要取决于对方的配置
Gets or sets the port number of the server. The specific value depends on the configuration of the other party.
公共属性ReceiveCacheLength
获取或设置一次接收时的数据长度,默认2KB数据长度,特殊情况的时候需要调整
Gets or sets the length of data received at a time. The default length is 2KB
公共属性代码示例ReceiveTimeout
获取或设置接收服务器反馈的时间,如果为负数,则不接收反馈
Gets or sets the time to receive server feedback, and if it is a negative number, does not receive feedback
公共属性代码示例Token
网络类的身份令牌,在hsl协议的模式下会有效,在和设备进行通信的时候是无效的
Network-type identity tokens will be valid in the hsl protocol mode and will not be valid when communicating with the device
(继承自 NetworkBase。)
Top
方法
  名称说明
受保护的方法CheckRemoteToken
检查当前的头子节信息的令牌是否是正确的,仅用于某些特殊的协议实现
Check whether the token of the current header subsection information is correct, only for some special protocol implementations
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnect(String, Int32)
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnect(IPEndPoint, Int32, IPEndPoint)
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnect(String, Int32, Int32)
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(String, Int32)
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(IPEndPoint, Int32, IPEndPoint)
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(String, Int32, Int32)
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法DeleteFileByName
删除一个指定的文件,如果文件不存在,直接返回 True,如果文件存在则直接删除,删除成功返回 True,如果发生了异常,返回False
Delete a specified file, if the file does not exist, return True directly, if the file exists, delete it directly, if the deletion is successful, return True, if an exception occurs, return False
(继承自 NetworkBase。)
公共方法Equals (继承自 Object。)
受保护的方法Finalize (继承自 Object。)
公共方法GetHashCode (继承自 Object。)
公共方法GetPipeSocket
获取当前用于通信的管道信息
Get the current pipe information used for communication
公共方法GetType (继承自 Object。)
公共方法IpAddressPing
对当前设备的IP地址进行PING的操作,返回PING的结果,正常来说,返回Success
PING the IP address of the current device and return the PING result. Normally, it returns Success
受保护的方法MemberwiseClone (继承自 Object。)
公共方法PackCommandWithHeader
对当前的命令进行打包处理,通常是携带命令头内容,标记当前的命令的长度信息,需要进行重写,否则默认不打包
The current command is packaged, usually carrying the content of the command header, marking the length of the current command, and it needs to be rewritten, otherwise it is not packaged by default
公共方法ReadFromCoreServer(Byte)
核心的数据交互读取,发数据发送到通道上去,然后从通道上接收返回的数据
The core data is read interactively, the data is sent to the serial port, and the returned data is received from the serial port
公共方法ReadFromCoreServer(IEnumerableByte)
公共方法ReadFromCoreServer(Byte, Boolean, Boolean)
核心的数据交互读取,发数据发送到通道上去,然后从通道上接收返回的数据
The core data is read interactively, the data is sent to the serial port, and the returned data is received from the serial port
公共方法ReadFromCoreServerAsync(Byte)
核心的数据交互读取,发数据发送到通道上去,然后从通道上接收返回的数据
The core data is read interactively, the data is sent to the serial port, and the returned data is received from the serial port
公共方法ReadFromCoreServerAsync(IEnumerableByte)
受保护的方法ReadStream
读取流中的数据到缓存区,读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.
(继承自 NetworkBase。)
受保护的方法ReadStreamAsync
读取流中的数据到缓存区,读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.
(继承自 NetworkBase。)
受保护的方法Receive(SslStream, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(Socket, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAndCheckBytes
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends
(继承自 NetworkBase。)
受保护的方法ReceiveAndCheckBytesAsync
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(SslStream, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(Socket, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveByMessage
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法ReceiveByMessageAsync
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法ReceiveBytesContentFromSocket
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveBytesContentFromSocketAsync
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveCommandLineFromSocket(Socket, Byte, Int32)
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.
(继承自 NetworkBase。)
受保护的方法ReceiveCommandLineFromSocket(Socket, Byte, Byte, Int32)
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.
(继承自 NetworkBase。)
受保护的方法ReceiveCommandLineFromSocketAsync(Socket, Byte, Int32)
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.
(继承自 NetworkBase。)
受保护的方法ReceiveCommandLineFromSocketAsync(Socket, Byte, Byte, Int32)
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.
(继承自 NetworkBase。)
受保护的方法ReceiveFromUdpSocket
从UDP接收相关的数据信息,允许子类重写实现一些更加特殊的功能验证。
受保护的方法ReceiveHslMessage
接收一条hsl协议的数据信息,自动解析,解压,解码操作,获取最后的实际的数据,接收结果依次为暗号,用户码,负载数据
Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order.
(继承自 NetworkBase。)
受保护的方法ReceiveHslMessageAsync
接收一条hsl协议的数据信息,自动解析,解压,解码操作,获取最后的实际的数据,接收结果依次为暗号,用户码,负载数据
Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order.
(继承自 NetworkBase。)
受保护的方法ReceiveMqttFile
使用MQTT协议从网络接收字节数组,然后写入文件或流中,支持进度报告
Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report
(继承自 NetworkBase。)
受保护的方法ReceiveMqttFileAsync
使用MQTT协议从网络接收字节数组,然后写入文件或流中,支持进度报告
Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report
(继承自 NetworkBase。)
受保护的方法ReceiveMqttMessage(SslStream, Int32, ActionInt64, Int64)
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data
(继承自 NetworkBase。)
受保护的方法ReceiveMqttMessage(Socket, Int32, ActionInt64, Int64)
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data
(继承自 NetworkBase。)
受保护的方法ReceiveMqttMessageAsync(SslStream, Int32, ActionInt64, Int64)
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data
(继承自 NetworkBase。)
受保护的方法ReceiveMqttMessageAsync(Socket, Int32, ActionInt64, Int64)
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data
(继承自 NetworkBase。)
受保护的方法ReceiveMqttStream
使用MQTT协议从socket接收指定长度的字节数组,然后全部写入到流中,可以指定进度报告
Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report
(继承自 NetworkBase。)
受保护的方法ReceiveMqttStreamAsync
使用MQTT协议从socket接收指定长度的字节数组,然后全部写入到流中,可以指定进度报告
Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report
(继承自 NetworkBase。)
受保护的方法ReceiveRedisCommand
从网络接收一条完整的redis报文的消息
Receive a complete redis message from the network
(继承自 NetworkBase。)
受保护的方法ReceiveRedisCommandAsync
从网络接收一条完整的redis报文的消息
Receive a complete redis message from the network
(继承自 NetworkBase。)
受保护的方法ReceiveRedisCommandString
接收一行基于redis协议的字符串的信息,需要指定固定的长度
Receive a line of information based on the redis protocol string, you need to specify a fixed length
(继承自 NetworkBase。)
受保护的方法ReceiveRedisCommandStringAsync
接收一行基于redis协议的字符串的信息,需要指定固定的长度
Receive a line of information based on the redis protocol string, you need to specify a fixed length
(继承自 NetworkBase。)
受保护的方法ReceiveStringArrayContentFromSocket
[自校验] 从网络中接收一个字符串数组,如果结果异常,则结束通讯
[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveStringArrayContentFromSocketAsync
[自校验] 从网络中接收一个字符串数组,如果结果异常,则结束通讯
[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveStringContentFromSocket
[自校验] 从网络中接收一个字符串数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveStringContentFromSocketAsync
[自校验] 从网络中接收一个字符串数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveVigorMessage
从Socket接收一条VigorPLC的消息数据信息,指定套接字对象及超时时间
Receive a message data information of VigorPLC from Socket, specify socket object and timeout time
(继承自 NetworkBase。)
受保护的方法ReceiveVigorMessageAsync
从Socket接收一条VigorPLC的消息数据信息,指定套接字对象及超时时间
Receive a message data information of VigorPLC from Socket, specify socket object and timeout time
(继承自 NetworkBase。)
受保护的方法ReceiveWebSocketPayload(SslStream)
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage
(继承自 NetworkBase。)
受保护的方法ReceiveWebSocketPayload(Socket)
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage
(继承自 NetworkBase。)
受保护的方法ReceiveWebSocketPayloadAsync(SslStream)
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage
(继承自 NetworkBase。)
受保护的方法ReceiveWebSocketPayloadAsync(Socket)
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage
(继承自 NetworkBase。)
受保护的方法Send(SslStream, Byte)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法Send(Socket, Byte)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法Send(SslStream, Byte, Int32, Int32)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法Send(Socket, Byte, Int32, Int32)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendAccountAndCheckReceive
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendAccountAndCheckReceiveAsync
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendAsync(SslStream, Byte)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendAsync(Socket, Byte)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendAsync(SslStream, Byte, Int32, Int32)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendAsync(Socket, Byte, Int32, Int32)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendBaseAndCheckReceive
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendBaseAndCheckReceiveAsync
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendBytesAndCheckReceive
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendBytesAndCheckReceiveAsync
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendMqttFile(Socket, Stream, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken)
使用MQTT协议将一个数据流发送到网络上去,需要保存的文件名,可选指定文件描述信息,进度报告
Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report
(继承自 NetworkBase。)
受保护的方法SendMqttFile(Socket, String, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken)
使用MQTT协议将一个文件发送到网络上去,需要指定文件名,保存的文件名,可选指定文件描述信息,进度报告
To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report
(继承自 NetworkBase。)
受保护的方法SendMqttFileAsync(Socket, Stream, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken)
使用MQTT协议将一个数据流发送到网络上去,需要保存的文件名,可选指定文件描述信息,进度报告
Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report
(继承自 NetworkBase。)
受保护的方法SendMqttFileAsync(Socket, String, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken)
使用MQTT协议将一个文件发送到网络上去,需要指定文件名,保存的文件名,可选指定文件描述信息,进度报告
To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report
(继承自 NetworkBase。)
受保护的方法SendMqttStream
使用MQTT协议将流中的数据读取到字节数组,然后都写入到socket里面,可以指定进度报告,主要用于将文件发送到网络。
Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network.
(继承自 NetworkBase。)
受保护的方法SendMqttStreamAsync
使用MQTT协议将流中的数据读取到字节数组,然后都写入到socket里面,可以指定进度报告,主要用于将文件发送到网络。
Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network.
(继承自 NetworkBase。)
受保护的方法SendStreamToSocket
发送一个流的所有数据到指定的网络套接字,需要指定发送的数据长度,支持按照百分比的进度报告
Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage.
(继承自 NetworkBase。)
受保护的方法SendStreamToSocketAsync
发送一个流的所有数据到指定的网络套接字,需要指定发送的数据长度,支持按照百分比的进度报告
Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage.
(继承自 NetworkBase。)
受保护的方法SendStringAndCheckReceive(Socket, Int32, String)
[自校验] 直接发送字符串数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendStringAndCheckReceive(Socket, Int32, String)
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendStringAndCheckReceiveAsync(Socket, Int32, String)
[自校验] 直接发送字符串数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendStringAndCheckReceiveAsync(Socket, Int32, String)
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
公共方法SetPipeSocket
设置一个新的网络管道,一般来说不需要调用本方法,当多个网口设备共用一个网络连接时才需要使用本方法进行设置共享的管道。
To set up a new network channel, generally speaking, you do not need to call this method. This method is only needed to set up a shared channel when multiple network port devices share a network connection.
公共方法ToString (重写 NetworkBaseToString.)
公共方法UnpackResponseContent
根据对方返回的报文命令,对命令进行基本的拆包,例如各种Modbus协议拆包为统一的核心报文,还支持对报文的验证
According to the message command returned by the other party, the command is basically unpacked, for example, various Modbus protocols are unpacked into a unified core message, and the verification of the message is also supported
受保护的方法WriteStream
将缓冲区的数据写入到流里面去
Write the buffer data to the stream
(继承自 NetworkBase。)
受保护的方法WriteStreamAsync
将缓冲区的数据写入到流里面去
Write the buffer data to the stream
(继承自 NetworkBase。)
受保护的方法WriteStreamFromSocket
从套接字中接收所有的数据然后写入到指定的流当中去,需要指定数据的长度,支持按照百分比进行进度报告
Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage.
(继承自 NetworkBase。)
受保护的方法WriteStreamFromSocketAsync
从套接字中接收所有的数据然后写入到指定的流当中去,需要指定数据的长度,支持按照百分比进行进度报告
Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage.
(继承自 NetworkBase。)
Top
字段
  名称说明
受保护的字段fileCacheSize
文件传输的时候的缓存大小,直接影响传输的速度,值越大,传输速度越快,越占内存,默认为100K大小
The size of the cache during file transfer directly affects the speed of the transfer. The larger the value, the faster the transfer speed and the more memory it takes. The default size is 100K.
(继承自 NetworkBase。)
受保护的字段LogMsgFormatBinary
设置日志记录报文是否二进制,如果为False,那就使用ASCII码
Set whether the log message is binary, if it is False, then use ASCII code
Top
扩展方法
  名称说明
公共扩展器方法ToJsonString
获取当前对象的JSON格式表示的字符串。
Gets the string represented by the JSON format of the current object.
(由 HslExtension 定义。)
Top
参见