PipeSslNet 方法

根据给定的消息，发送的数据，接收到数据来判断是否接收完成报文

关闭当前的管道信息，返回是否关闭成功的结果对象

当前的管道创建一个 SSL/TLS 加密的流
The current pipeline creates an SSL/TLS encrypted stream

Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.

Performs application-defined tasks associated with freeing, releasing, or resetting unmanaged resources.

Determines whether the specified object is equal to the current object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

获取当前的远程连接信息，如果端口号设置了可选的数组，那么每次获取对象就会发生端口号切换的操作。
Get the current remote connection information. If the port number is set to an optional array, the port number switching operation will occur every time the object is obtained.

Serves as the default hash function.

Gets the Type of the current instance.

自增当前的连续错误计数，并且获取自增后的值信息，最大到10亿为止，无法继续增加了。

当前的管道连接对象是否发生了错误

Creates a shallow copy of the current Object.

当管道打开成功的时候执行的事件，如果返回失败，则管道的打开操作返回失败

打开当前的管道信息，返回是否成功打开的结果对象，并通过属性 Content 指示当前是否为新创建的连接对象，如果是，则该值为 true

打开当前的管道信息，返回是否成功打开的结果对象，并通过属性 Content 指示当前是否为新创建的连接对象，如果是，则该值为 true

主动引发一个管道错误，从而让管道可以重新打开

将数据发送到当前的管道里，并从管道接收相关的数据信息，可以指定消息类型，发送数据，是否有数据响应，休眠时间
To send data to the current pipeline and receive relevant data information from the pipeline, you can specify the message type, the data sent, whether there is a data response, and the sleep time

将数据发送到当前的管道里，并从管道接收相关的数据信息，可以指定消息类型，发送数据，是否有数据响应，休眠时间
To send data to the current pipeline and receive relevant data information from the pipeline, you can specify the message type, the data sent, whether there is a data response, and the sleep time

将数据发送到当前的管道里，并从管道接收相关的数据信息，可以指定消息类型，发送数据，是否有数据响应，休眠时间
To send data to the current pipeline and receive relevant data information from the pipeline, you can specify the message type, the data sent, whether there is a data response, and the sleep time

将数据发送到当前的管道里，并从管道接收相关的数据信息，可以指定消息类型，发送数据，是否有数据响应，休眠时间
To send data to the current pipeline and receive relevant data information from the pipeline, you can specify the message type, the data sent, whether there is a data response, and the sleep time

从管道里，接收指定长度的报文数据信息，如果长度指定为-1，表示接收不超过2048字节的动态长度。另外可以指定超时时间，进度报告等
Receives the packet data of a specified length from the pipe. If the length is set to -1, it indicates that the dynamic length of the packet is not more than 2048 bytes. You can also specify timeouts, progress reports, etc

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

从管道里，接收指定长度的报文数据信息，如果长度指定为-1，表示接收不超过2048字节的动态长度。另外可以指定超时时间，进度报告等
Receives the packet data of a specified length from the pipe. If the length is set to -1, it indicates that the dynamic length of the packet is not more than 2048 bytes. You can also specify timeouts, progress reports, etc

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

包含了一个复杂的逻辑，从管道里根据当前的消息格式定义，接收报文信息，这个报文可能是来自服务器主动推送的。具体可以通过参数 useActivePush 来特殊控制。
Contains a complex logic from the pipeline, according to the current message format definition, to receive message information, this message may be actively pushed from the server. The parameter useActivePush can be used for special control.

包含了一个复杂的逻辑，从管道里根据当前的消息格式定义，接收报文信息，这个报文可能是来自服务器主动推送的。具体可以通过参数 useActivePush 来特殊控制。
Contains a complex logic from the pipeline, according to the current message format definition, to receive message information, this message may be actively pushed from the server. The parameter useActivePush can be used for special control.

重置当前的连续错误计数为0，并且返回重置前时候的值

发送数据到当前的管道中去
Send data to the current pipe

将一个数据缓存中的指定的部分字段，发送到当前的管道中去
Sends the specified partial field from a data cache to the current pipeline

发送数据到当前的管道中去
Send data to the current pipe

将一个数据缓存中的指定的部分字段，发送到当前的管道中去
Sends the specified partial field from a data cache to the current pipeline

设置当前的问答状态下的缓存数据

使用一个证书路径来初始化 SSL/TLS 通信
Use a certificate path to initialize SSL/TLS communication

设置多个可选的端口号信息，例如在三菱的PLC里，支持配置多个端口号，当一个网络发生异常时，立即切换端口号连接读写，提升系统的稳定性
Set multiple optional port number information. For example, in Mitsubishi PLC, it supports to configure multiple port numbers. When an abnormality occurs in a network, the port number is immediately switched to connect to read and write to improve the stability of the system.

开始后台接收相关的报文数据，当UseServerActivePush为True时，则使用本方法

Returns a string that represents the current object.

获取当前对象的JSON格式表示的字符串。
Gets the string represented by the JSON format of the current object.