MqttSyncClient 方法

认证账号，根据已经设置的用户名和密码，进行发送服务器进行账号认证。
Authentication account, according to the user name and password that have been set, sending server for account authentication.

认证账号，根据已经设置的用户名和密码，进行发送服务器进行账号认证。
Authentication account, according to the user name and password that have been set, sending server for account authentication.

检查当前从网口接收的数据是否是完整的，如果是完整的，则需要返回 True，表示数据接收立即完成，默认返回 True
Check whether the data currently received from the network port is complete, and if it is complete, you need to return True, indicating that the data reception is completed immediately, and the default value is True

检查当前的头子节信息的令牌是否是正确的，仅用于某些特殊的协议实现
Check whether the token of the current header subsection information is correct, only for some special protocol implementations

手动断开与远程服务器的连接，如果当前是长连接模式，那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode

手动断开与远程服务器的连接，如果当前是长连接模式，那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode

尝试连接远程的服务器，如果连接成功，就切换短连接模式到长连接模式，后面的每次请求都共享一个通道，使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.

使用指定的套接字创建异形客户端，在异形客户端的模式下，网络通道需要被动创建。
Use the specified socket to create the alien client. In the alien client mode, the network channel needs to be created passively.

使用一个MQTT中转服务器来连接设备对象，并进行相关的读取操作

尝试连接远程的服务器，如果连接成功，就切换短连接模式到长连接模式，后面的每次请求都共享一个通道，使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.

创建一个新的socket对象并连接到远程的地址，默认超时时间为10秒钟，需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.

创建一个新的socket对象并连接到远程的地址，需要指定远程终结点，超时时间（单位是毫秒），如果需要绑定本地的IP或是端口，传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object

创建一个新的socket对象并连接到远程的地址，需要指定ip地址以及端口号信息，还有超时时间，单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds

创建一个新的socket对象并连接到远程的地址，默认超时时间为10秒钟，需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.

创建一个新的socket对象并连接到远程的地址，需要指定远程终结点，超时时间（单位是毫秒），如果需要绑定本地的IP或是端口，传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object

创建一个新的socket对象并连接到远程的地址，需要指定ip地址以及端口号信息，还有超时时间，单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds

决定当前的消息是否是应答机制的消息内容，需要在客户端进行重写实现，如果是应答机制，返回 True, 否则返回 False
To determine whether the current message is the message content of the response mechanism, it needs to be rewritten on the client side. If it is the response mechanism, return True, otherwise return False

[文件引擎] 删除服务器的指定的文件名，需要指定分类信息，文件名
[File Engine] Delete the specified file name of the server, need to specify the classification information, file name

[文件引擎] 删除服务器的指定的文件名，需要指定分类信息，文件名
[File Engine] Delete the specified file name of the server, need to specify the classification information, file name

[文件引擎] 删除服务器的指定的文件名，需要指定分类信息，文件名
[File Engine] Delete the specified file name of the server, need to specify the classification information, file name

[文件引擎] 删除服务器的指定的文件名，需要指定分类信息，文件名
[File Engine] Delete the specified file name of the server, need to specify the classification information, file name

删除一个指定的文件，如果文件不存在，直接返回 True，如果文件存在则直接删除，删除成功返回 True，如果发生了异常，返回False
Delete a specified file, if the file does not exist, return True directly, if the file exists, delete it directly, if the deletion is successful, return True, if an exception occurs, return False

[文件引擎] 删除服务器上指定的分类信息及管理的所有的文件，包含所有的子分类信息，不可逆操作，谨慎操作。
[File Engine] Delete the specified classification information and all files managed on the server, including all sub-classification information, irreversible operation, and careful operation.

[文件引擎] 删除服务器上指定的分类信息及管理的所有的文件，包含所有的子分类信息，不可逆操作，谨慎操作。
[File Engine] Delete the specified classification information and all files managed on the server, including all sub-classification information, irreversible operation, and careful operation.

[文件引擎] 删除服务器上指定的分类的所有的文件，不可逆操作，谨慎操作。
[File Engine] Delete the specified classification information and all files managed on the server, irreversible operation, and careful operation.

[文件引擎] 删除服务器上指定的分类的所有的文件，不可逆操作，谨慎操作。
[File Engine] Delete the specified classification information and all files managed on the server, irreversible operation, and careful operation.

释放当前的资源，如果调用了本方法，那么该对象再使用的时候，需要重新实例化。
Release the current resource. If this method is called, the object needs to be instantiated again when it is used again.

释放当前的资源，并自动关闭长连接，如果设置了的话

[文件引擎] 从远程服务器下载一个文件，生成一个Bitmap图片对象，需要指定文件类别，文件名，进度报告，可用于用户头像的存储
[File Engine] Download a file from a remote server and generate a Bitmap image object. You need to specify the file category, file name, and progress report, which can be used to store the user's avatar

[文件引擎] 从远程服务器下载一个文件，生成一个Bitmap图片对象，需要指定文件类别，文件名，进度报告，可用于用户头像的存储
[File Engine] Download a file from a remote server and generate a Bitmap image object. You need to specify the file category, file name, and progress report, which can be used to store the user's avatar

[文件引擎] 从远程服务器下载一个文件到流中，需要指定文件类别，文件名，进度报告，本地保存的文件名
To download a file from a remote server to the stream, you need to specify the file category, file name, progress report, and file name saved locally

[文件引擎] 从远程服务器下载一个文件到本地，需要指定文件类别，文件名，进度报告，本地保存的文件名
[File Engine] To download a file from a remote server to the local, you need to specify the file category, file name, progress report, and file name saved locally

[文件引擎] 从远程服务器下载一个文件到流中，需要指定文件类别，文件名，进度报告，本地保存的文件名
To download a file from a remote server to the stream, you need to specify the file category, file name, progress report, and file name saved locally

[文件引擎] 从远程服务器下载一个文件到本地，需要指定文件类别，文件名，进度报告，本地保存的文件名
[File Engine] To download a file from a remote server to the local, you need to specify the file category, file name, progress report, and file name saved locally

[文件引擎] 下载指定分类信息的所有的文件描述信息，需要指定分类信息，例如：Files/Personal/Admin
[File Engine] To download all the file description information of the specified classification information, you need to specify the classification information, for example: Files/Personal/Admin

[文件引擎] 下载指定分类信息的所有的文件描述信息，需要指定分类信息，例如：Files/Personal/Admin
[File Engine] To download all the file description information of the specified classification information, you need to specify the classification information, for example: Files/Personal/Admin

下载指定分类信息的全部子分类信息
Download all sub-category information of the specified category information

下载指定分类信息的全部子分类信息
Download all sub-category information of the specified category information

和服务器交互完成的时候调用的方法，可以根据读写结果进行一些额外的操作，具体的操作需要根据实际的需求来重写实现
The method called when the interaction with the server is completed can perform some additional operations based on the read and write results. The specific operations need to be rewritten according to actual needs.

根据实际的协议选择是否重写本方法，有些协议在断开连接之前，需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.

根据实际的协议选择是否重写本方法，有些协议在断开连接之前，需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.

获取本次操作的可用的网络通道，如果是短连接，就重新生成一个新的网络通道，如果是长连接，就复用当前的网络通道。
Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused.

获取本次操作的可用的网络通道，如果是短连接，就重新生成一个新的网络通道，如果是长连接，就复用当前的网络通道。
Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused.

[文件引擎] 获取服务器文件夹的指定目录的文件统计信息，包括文件数量，总大小，最后更新时间
[File Engine] Get the file statistics of the specified directory of the server folder, including the number of files, the total size, and the last update time

[文件引擎] 获取服务器文件夹的指定目录的文件统计信息，包括文件数量，总大小，最后更新时间
[File Engine] Get the file statistics of the specified directory of the server folder, including the number of files, the total size, and the last update time

获取一个新的消息对象的方法，需要在继承类里面进行重写
The method to get a new message object needs to be overridden in the inheritance class

获取当前用于通信的管道信息
Get the current pipe information used for communication

[文件引擎] 获取服务器文件夹的指定目录的所有子目录的文件信息，包括每个子目录的文件数量，总大小，最后更新时间
[File Engine] Get the file information of all subdirectories of the specified directory of the server folder, including the number of files in each subdirectory, the total size, and the last update time

[文件引擎] 获取服务器文件夹的指定目录的所有子目录的文件信息，包括每个子目录的文件数量，总大小，最后更新时间
[File Engine] Get the file information of all subdirectories of the specified directory of the server folder, including the number of files in each subdirectory, the total size, and the last update time

根据实际的协议选择是否重写本方法，有些协议在创建连接之后，需要进行一些初始化的信号握手，才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.

根据实际的协议选择是否重写本方法，有些协议在创建连接之后，需要进行一些初始化的信号握手，才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.

对当前设备的IP地址进行PING的操作，返回PING的结果，正常来说，返回Success
PING the IP address of the current device and return the PING result. Normally, it returns Success

[文件引擎] 请求服务器指定分类是否存在指定的文件名，需要指定分类信息，文件名
[File Engine] Request the server to specify whether the specified file name exists in the specified category, need to specify the category information, file name

[文件引擎] 请求服务器指定分类是否存在指定的文件名，需要指定分类信息，文件名
[File Engine] Request the server to specify whether the specified file name exists in the specified category, need to specify the category information, file name

对当前的命令进行打包处理，通常是携带命令头内容，标记当前的命令的长度信息，需要进行重写，否则默认不打包
The current command is packaged, usually carrying the content of the command header, marking the length of the current command, and it needs to be rewritten, otherwise it is not packaged by default

从MQTT服务器同步读取数据，将payload发送到服务器，然后从服务器返回相关的数据，支持数据发送进度报告，服务器执行进度报告，接收数据进度报告操作
Synchronously read data from the MQTT server, send the payload to the server, and then return relevant data from the server, support data transmission progress report, the server executes the progress report, and receives the data progress report

从MQTT服务器同步读取数据，将payload发送到服务器，然后从服务器返回相关的数据，支持数据发送进度报告，服务器执行进度报告，接收数据进度报告操作
Synchronously read data from the MQTT server, send the payload to the server, and then return relevant data from the server, support data transmission progress report, the server executes the progress report, and receives the data progress report

将数据发送到当前的网络通道中，并从网络通道中接收一个INetMessage指定的完整的报文，网络通道将根据GetAvailableSocket方法自动获取，本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.

将多个数据报文按顺序发到设备，并从设备接收返回的数据内容，然后拼接成一个Byte[]信息，需要重写UnpackResponseContent(Byte, Byte)方法才能返回正确的结果。
Send multiple data packets to the device in sequence, and receive the returned data content from the device, and then splicing them into a Byte[] message, you need to rewrite UnpackResponseContent(Byte, Byte) method to return the correct result.

将数据发送到当前的网络通道中，并从网络通道中接收一个INetMessage指定的完整的报文，网络通道将根据GetAvailableSocket方法自动获取，本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.

将数据报文发送指定的网络通道上，根据当前指定的INetMessage类型，返回一条完整的数据指令
Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type

将数据发送到当前的网络通道中，并从网络通道中接收一个INetMessage指定的完整的报文，网络通道将根据GetAvailableSocket方法自动获取，本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.

将多个数据报文按顺序发到设备，并从设备接收返回的数据内容，然后拼接成一个Byte[]信息，需要重写UnpackResponseContent(Byte, Byte)方法才能返回正确的结果。
Send multiple data packets to the device in sequence, and receive the returned data content from the device, and then splicing them into a Byte[] message, you need to rewrite UnpackResponseContent(Byte, Byte) method to return the correct result.

将数据发送到当前的网络通道中，并从网络通道中接收一个INetMessage指定的完整的报文，网络通道将根据GetAvailableSocket方法自动获取，本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.

将数据报文发送指定的网络通道上，根据当前指定的INetMessage类型，返回一条完整的数据指令
Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type

读取服务器的已经驻留的所有消息的主题列表
Read the topic list of all messages that have resided on the server

读取服务器的已经驻留的所有消息的主题列表
Read the topic list of all messages that have resided on the server

读取MQTT服务器注册的RPC接口，忽略返回的Topic数据，直接将结果转换为泛型对象，如果JSON转换失败，将返回错误，参数传递主题和数据负载， 数据负载示例：new { address = "", length = 0 } 本质是一个匿名对象。
Read the RPC interface registered by the MQTT server, ignore the returned Topic data, and directly convert the result into a generic object. If the JSON conversion fails, an error will be returned. The parameter passes the topic and the data payload. The data payload example: new { address = "", length = 0 } is essentially an anonymous object.

读取MQTT服务器注册的RPC接口，忽略返回的Topic数据，直接将结果转换为泛型对象，如果JSON转换失败，将返回错误，参数传递主题和数据负载， 数据负载示例："{\"address\": \"100\",\"length\": 10}" 本质是一个字符串。
Read the RPC interface registered by the MQTT server, ignore the returned Topic data, and directly convert the result into a generic object. If the JSON conversion fails, an error will be returned. The parameter passes the topic and the data payload. The data payload example: "{\"address\ ": \"100\",\"length\": 10}" is essentially a string.

读取服务器的指定的API接口的每天的调用次数，如果API接口不存在，或是还没有调用数据，则返回失败。
Read the number of calls per day of the designated API interface of the server. If the API interface does not exist or the data has not been called yet, it returns a failure.

读取服务器的指定的API接口的每天的调用次数，如果API接口不存在，或是还没有调用数据，则返回失败。
Read the number of calls per day of the designated API interface of the server. If the API interface does not exist or the data has not been called yet, it returns a failure.

读取服务器的已经注册的API信息列表，将返回API的主题路径，注释信息，示例的传入的数据信息。
Read the registered API information list of the server, and return the API subject path, annotation information, and sample incoming data information.

读取服务器的已经注册的API信息列表，将返回API的主题路径，注释信息，示例的传入的数据信息。
Read the registered API information list of the server, and return the API subject path, annotation information, and sample incoming data information.

读取MQTT服务器注册的RPC接口，忽略返回的Topic数据，直接将结果转换为泛型对象，如果JSON转换失败，将返回错误，参数传递主题和数据负载， 数据负载示例：new { address = "", length = 0 } 本质是一个匿名对象。
Read the RPC interface registered by the MQTT server, ignore the returned Topic data, and directly convert the result into a generic object. If the JSON conversion fails, an error will be returned. The parameter passes the topic and the data payload. The data payload example: new { address = "", length = 0 } is essentially an anonymous object.

读取MQTT服务器注册的RPC接口，忽略返回的Topic数据，直接将结果转换为泛型对象，如果JSON转换失败，将返回错误，参数传递主题和数据负载， 数据负载示例："{\"address\": \"100\",\"length\": 10}" 本质是一个字符串。
Read the RPC interface registered by the MQTT server, ignore the returned Topic data, and directly convert the result into a generic object. If the JSON conversion fails, an error will be returned. The parameter passes the topic and the data payload. The data payload example: "{\"address\ ": \"100\",\"length\": 10}" is essentially a string.

读取服务器里当前的会话信息

读取流中的数据到缓存区，读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.

读取流中的数据到缓存区，读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.

从MQTT服务器同步读取数据，将指定编码的字符串payload发送到服务器，然后从服务器返回相关的数据，并转换为指定编码的字符串，支持数据发送进度报告，服务器执行进度报告，接收数据进度报告操作
Synchronously read data from the MQTT server, send the specified encoded string payload to the server, and then return the data from the server, and convert it to the specified encoded string, support data transmission progress report, the server executes the progress report, and receives the data progress report

从MQTT服务器同步读取数据，将指定编码的字符串payload发送到服务器，然后从服务器返回相关的数据，并转换为指定编码的字符串，支持数据发送进度报告，服务器执行进度报告，接收数据进度报告操作
Synchronously read data from the MQTT server, send the specified encoded string payload to the server, and then return the data from the server, and convert it to the specified encoded string, support data transmission progress report, the server executes the progress report, and receives the data progress report

读取服务器的已经驻留的指定主题的消息内容
Read the topic list of all messages that have resided on the server

读取服务器的已经驻留的指定主题的消息内容
Read the topic list of all messages that have resided on the server

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

[自校验] 接收一条完整的同步数据，包含头子节和内容字节，基础的数据，如果结果异常，则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends

[自校验] 接收一条完整的同步数据，包含头子节和内容字节，基础的数据，如果结果异常，则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

接收固定长度的字节数组，允许指定超时时间，默认为60秒，当length大于0时，接收固定长度的数据内容，当length小于0时，buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.

接收一条完整的 数据内容，需要指定超时时间，单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds

接收一条完整的 数据内容，需要指定超时时间，单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds

[自校验] 从网络中接收一串字节数据，如果结果异常，则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.

[自校验] 从网络中接收一串字节数据，如果结果异常，则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.

接收一行命令数据，需要自己指定这个结束符，默认超时时间为60秒，也即是60000，单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.

接收一行命令数据，需要自己指定这个结束符，默认超时时间为60秒，也即是60000，单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.

接收一行命令数据，需要自己指定这个结束符，默认超时时间为60秒，也即是60000，单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.

接收一行命令数据，需要自己指定这个结束符，默认超时时间为60秒，也即是60000，单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.

接收一条hsl协议的数据信息，自动解析，解压，解码操作，获取最后的实际的数据，接收结果依次为暗号，用户码，负载数据
Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order.

接收一条hsl协议的数据信息，自动解析，解压，解码操作，获取最后的实际的数据，接收结果依次为暗号，用户码，负载数据
Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order.

使用MQTT协议从网络接收字节数组，然后写入文件或流中，支持进度报告
Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report

使用MQTT协议从网络接收字节数组，然后写入文件或流中，支持进度报告
Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report

接收一条完整的MQTT协议的报文信息，包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data

接收一条完整的MQTT协议的报文信息，包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data

接收一条完整的MQTT协议的报文信息，包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data

接收一条完整的MQTT协议的报文信息，包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data

使用MQTT协议从socket接收指定长度的字节数组，然后全部写入到流中，可以指定进度报告
Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report

使用MQTT协议从socket接收指定长度的字节数组，然后全部写入到流中，可以指定进度报告
Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report

从网络接收一条完整的redis报文的消息
Receive a complete redis message from the network

从网络接收一条完整的redis报文的消息
Receive a complete redis message from the network

接收一行基于redis协议的字符串的信息，需要指定固定的长度
Receive a line of information based on the redis protocol string, you need to specify a fixed length

接收一行基于redis协议的字符串的信息，需要指定固定的长度
Receive a line of information based on the redis protocol string, you need to specify a fixed length

[自校验] 从网络中接收一个字符串数组，如果结果异常，则结束通讯
[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends.

[自校验] 从网络中接收一个字符串数组，如果结果异常，则结束通讯
[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends.

[自校验] 从网络中接收一个字符串数据，如果结果异常，则结束通讯
[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends.

[自校验] 从网络中接收一个字符串数据，如果结果异常，则结束通讯
[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends.

从Socket接收一条VigorPLC的消息数据信息，指定套接字对象及超时时间
Receive a message data information of VigorPLC from Socket, specify socket object and timeout time

从Socket接收一条VigorPLC的消息数据信息，指定套接字对象及超时时间
Receive a message data information of VigorPLC from Socket, specify socket object and timeout time

从socket接收一条完整的websocket数据，返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage

从socket接收一条完整的websocket数据，返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage

从socket接收一条完整的websocket数据，返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage

从socket接收一条完整的websocket数据，返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage

[文件引擎] 重命名服务器上指定的路径信息，需要指定新的路径名称，当新的路径已经存在的时候，命名失败。
[File Engine] Renames the specified path information on the server, you need to specify a new path name, and when the new path already exists, the naming fails.

[文件引擎] 重命名服务器上指定的路径信息，需要指定新的路径名称，当新的路径已经存在的时候，命名失败。
[File Engine] Renames the specified path information on the server, you need to specify a new path name, and when the new path already exists, the naming fails.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

[自校验] 直接发送字符串数组并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 直接发送字符串数组并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

发送消息给套接字，直到完成的时候返回，经过测试，本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.

[自校验] 发送字节数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 发送字节数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 发送字节数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 发送字节数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

使用MQTT协议将一个数据流发送到网络上去，需要保存的文件名，可选指定文件描述信息，进度报告
Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report

使用MQTT协议将一个文件发送到网络上去，需要指定文件名，保存的文件名，可选指定文件描述信息，进度报告
To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report

使用MQTT协议将一个数据流发送到网络上去，需要保存的文件名，可选指定文件描述信息，进度报告
Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report

使用MQTT协议将一个文件发送到网络上去，需要指定文件名，保存的文件名，可选指定文件描述信息，进度报告
To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report

使用MQTT协议将流中的数据读取到字节数组，然后都写入到socket里面，可以指定进度报告，主要用于将文件发送到网络。
Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network.

使用MQTT协议将流中的数据读取到字节数组，然后都写入到socket里面，可以指定进度报告，主要用于将文件发送到网络。
Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network.

发送一个流的所有数据到指定的网络套接字，需要指定发送的数据长度，支持按照百分比的进度报告
Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage.

发送一个流的所有数据到指定的网络套接字，需要指定发送的数据长度，支持按照百分比的进度报告
Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage.

[自校验] 直接发送字符串数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 直接发送字符串数组并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 直接发送字符串数据并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

[自校验] 直接发送字符串数组并确认对方接收完成数据，如果结果异常，则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.

设置当前的登录的账户名和密码信息，并启用账户验证的功能，账户名为空时设置不生效
Set the current login account name and password information, and enable the account verification function. The account name setting will not take effect when it is empty

在读取数据之前可以调用本方法将客户端设置为长连接模式，相当于跳过了ConnectServer的结果验证，对异形客户端无效，当第一次进行通信时再进行创建连接请求。
Before reading the data, you can call this method to set the client to the long connection mode, which is equivalent to skipping the result verification of ConnectServer, and it is invalid for the alien client. When the first communication is performed, the connection creation request is performed.

设置一个新的网络管道，一般来说不需要调用本方法，当多个网口设备共用一个网络连接时才需要使用本方法进行设置共享的管道。
To set up a new network channel, generally speaking, you do not need to call this method. This method is only needed to set up a shared channel when multiple network port devices share a network connection.

根据对方返回的报文命令，对命令进行基本的拆包，例如各种Modbus协议拆包为统一的核心报文，还支持对报文的验证
According to the message command returned by the other party, the command is basically unpacked, for example, various Modbus protocols are unpacked into a unified core message, and the verification of the message is also supported

[文件引擎] 上传文件给服务器，需要指定上传文件的路径信息(服务器保存的名称就是文件名)，以及上传到服务器的分类信息，支持进度汇报功能。
[File Engine] To upload a file to the server, you need to specify the path information of the uploaded file (the name saved by the server is the file name), as well as the classification information uploaded to the server, to support the progress report function.

[文件引擎] 上传一个Bitmap图片对象到服务器指定的分类下面，需要指定分类信息，服务器保存的文件名，描述信息，支持进度报告
[File Engine] Upload a Bitmap image object to the category specified by the server, you need to specify the category information, the file name saved by the server, description information, and support for progress reports

[文件引擎] 上传流给服务器，需要指定流，服务器保存的名字，以及上传到服务器的分类信息，支持进度汇报功能。
[File Engine] To upload a stream to the server, you need to specify the stream, the name saved by the server, and the classification information uploaded to the server to support the progress reporting function.

[文件引擎] 上传文件给服务器，需要指定上传文件的路径信息，服务器保存的名字，以及上传到服务器的分类信息，支持进度汇报功能。
[File Engine] To upload a file to the server, you need to specify the path information of the uploaded file, the name saved by the server, and the classification information uploaded to the server to support the progress report function.

[文件引擎] 上传文件给服务器，需要指定上传文件的路径信息(服务器保存的名称就是文件名)，以及上传到服务器的分类信息，支持进度汇报功能。
[File Engine] To upload a file to the server, you need to specify the path information of the uploaded file (the name saved by the server is the file name), as well as the classification information uploaded to the server, to support the progress report function.

[文件引擎] 上传一个Bitmap图片对象到服务器指定的分类下面，需要指定分类信息，服务器保存的文件名，描述信息，支持进度报告
[File Engine] Upload a Bitmap image object to the category specified by the server, you need to specify the category information, the file name saved by the server, description information, and support for progress reports

[文件引擎] 上传流给服务器，需要指定流，服务器保存的名字，以及上传到服务器的分类信息，支持进度汇报功能。
[File Engine] To upload a stream to the server, you need to specify the stream, the name saved by the server, and the classification information uploaded to the server to support the progress reporting function.

[文件引擎] 上传文件给服务器，需要指定上传文件的路径信息，服务器保存的名字，以及上传到服务器的分类信息，支持进度汇报功能。
[File Engine] To upload a file to the server, you need to specify the path information of the uploaded file, the name saved by the server, and the classification information uploaded to the server to support the progress report function.

将缓冲区的数据写入到流里面去
Write the buffer data to the stream

将缓冲区的数据写入到流里面去
Write the buffer data to the stream

从套接字中接收所有的数据然后写入到指定的流当中去，需要指定数据的长度，支持按照百分比进行进度报告
Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage.

从套接字中接收所有的数据然后写入到指定的流当中去，需要指定数据的长度，支持按照百分比进行进度报告
Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage.

获取当前对象的JSON格式表示的字符串。
Gets the string represented by the JSON format of the current object.