点击或拖拽改变大小

OpenProtocolNet 方法

OpenProtocolNet 类型公开以下成员。

方法
  名称说明
公共方法静态成员BuildOpenProtocolMessage
构建一个读取的初始报文
公共方法静态成员BuildReadCommand
构建一个读取的初始报文
公共方法静态成员CheckRequestReplyMessages
检查请求返回的消息是否合法的
公共方法代码示例ConnectClose
手动断开与远程服务器的连接,如果当前是长连接模式,那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode
(继承自 TcpNetCommunication。)
公共方法代码示例ConnectCloseAsync
手动断开与远程服务器的连接,如果当前是长连接模式,那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode
(继承自 TcpNetCommunication。)
公共方法代码示例ConnectServer
尝试连接远程的服务器,如果连接成功,就切换短连接模式到长连接模式,后面的每次请求都共享一个通道,使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.
(继承自 TcpNetCommunication。)
公共方法代码示例ConnectServerAsync
尝试连接远程的服务器,如果连接成功,就切换短连接模式到长连接模式,后面的每次请求都共享一个通道,使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.
(继承自 TcpNetCommunication。)
受保护的方法DecideWhetherQAMessage
决定当前的消息是否是用于问答机制返回的消息,默认直接返回 true, 实际的情况需要根据协议进行重写方法
To determine whether the current message is the message returned by the question answering mechanism, the default is true. In actual cases, the rewriting method needs to be performed according to the protocol
(重写 BinaryCommunicationDecideWhetherQAMessage(CommunicationPipe, OperateResultByte).)
公共方法Equals
Determines whether the specified object is equal to the current object.
(继承自 Object。)
受保护的方法ExtraAfterReadFromCoreServer
和服务器交互完成的时候调用的方法,可以根据读写结果进行一些额外的操作,具体的操作需要根据实际的需求来重写实现
The method called when the interaction with the server is completed can perform some additional operations based on the read and write results. The specific operations need to be rewritten according to actual needs.
(继承自 BinaryCommunication。)
受保护的方法代码示例ExtraOnDisconnect
根据实际的协议选择是否重写本方法,有些协议在断开连接之前,需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.
(重写 BinaryCommunicationExtraOnDisconnect.)
受保护的方法代码示例ExtraOnDisconnectAsync
根据实际的协议选择是否重写本方法,有些协议在断开连接之前,需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.
(继承自 BinaryCommunication。)
受保护的方法Finalize
Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.
(继承自 Object。)
公共方法静态成员GetErrorText
根据错误代码来获取到错误文本信息
公共方法GetHashCode
Serves as the default hash function.
(继承自 Object。)
受保护的方法GetLogTextFromBinary
获取当前的报文进行日志记录的时候,是否使用二进制的格式记录,默认返回 LogMsgFormatBinary,重写可以根据session对象分别返回不同记录模式
Whether to log the current packet in binary format, the default return is LogMsgFormatBinary. If you want to override it, different recording modes can be returned according to session
(继承自 BinaryCommunication。)
受保护的方法GetNewNetMessage
获取一个新的消息对象的方法,需要在继承类里面进行重写
The method to get a new message object needs to be overridden in the inheritance class
(重写 BinaryCommunicationGetNewNetMessage.)
公共方法GetType
Gets the Type of the current instance.
(继承自 Object。)
受保护的方法代码示例InitializationOnConnect
根据实际的协议选择是否重写本方法,有些协议在创建连接之后,需要进行一些初始化的信号握手,才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.
(重写 BinaryCommunicationInitializationOnConnect.)
受保护的方法代码示例InitializationOnConnectAsync
根据实际的协议选择是否重写本方法,有些协议在创建连接之后,需要进行一些初始化的信号握手,才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.
(重写 BinaryCommunicationInitializationOnConnectAsync.)
公共方法IpAddressPing
对当前设备的IP地址进行PING的操作,返回PING的结果,正常来说,返回Success
PING the IP address of the current device and return the PING result. Normally, it returns Success
(继承自 TcpNetCommunication。)
受保护的方法LogRevcMessage(Byte)
使用日志记录一个接收的报文信息
` Logs are used to record information about a received packet
(继承自 BinaryCommunication。)
受保护的方法LogRevcMessage(Byte, PipeSession)
使用日志记录一个接收的报文信息
` Logs are used to record information about a received packet
(继承自 BinaryCommunication。)
受保护的方法LogSendMessage(Byte)
使用日志记录一个发送的报文信息
Logs are used to record information about a send packet
(继承自 BinaryCommunication。)
受保护的方法LogSendMessage(Byte, PipeSession)
使用日志记录一个发送的报文信息
Logs are used to record information about a send packet
(继承自 BinaryCommunication。)
受保护的方法MemberwiseClone
Creates a shallow copy of the current Object.
(继承自 Object。)
公共方法PackCommandWithHeader
对当前的命令进行打包处理,通常是携带命令头内容,标记当前的命令的长度信息,需要进行重写,否则默认不打包
The current command is packaged, usually carrying the content of the command header, marking the length of the current command, and it needs to be rewritten, otherwise it is not packaged by default
(继承自 BinaryCommunication。)
公共方法ReadCustomer
使用自定义的命令读取数据,需要指定每个参数信息,然后返回字符串数据内容,根据实际的功能码,解析出实际的数据信息
To use a custom command to read data, you need to specify each parameter information, then return the string data content, and parse the actual data information according to the actual function code
公共方法ReadCustomerAsync
使用自定义的命令读取数据,需要指定每个参数信息,然后返回字符串数据内容,根据实际的功能码,解析出实际的数据信息
To use a custom command to read data, you need to specify each parameter information, then return the string data content, and parse the actual data information according to the actual function code
公共方法代码示例ReadFromCoreServer(Byte)
将二进制的数据发送到管道中去,然后从管道里接收二进制的数据回来,并返回是否成功的结果对象。
Send binary data to the pipeline, and then receive binary data back from the pipeline, and return whether the success of the result object
(继承自 BinaryCommunication。)
公共方法ReadFromCoreServer(IEnumerableByte) (继承自 BinaryCommunication。)
公共方法代码示例ReadFromCoreServer(Byte, Boolean, Boolean)
将二进制的数据发送到管道中去,然后从管道里接收二进制的数据回来,并返回是否成功的结果对象。
Send binary data to the pipeline, and then receive binary data back from the pipeline, and return whether the success of the result object
(继承自 BinaryCommunication。)
公共方法ReadFromCoreServer(CommunicationPipe, Byte, Boolean, Boolean)
使用指定的管道来进行数据通信,发送原始数据到管道,然后从管道接收相关的数据返回,本方法无锁
(继承自 BinaryCommunication。)
公共方法代码示例ReadFromCoreServerAsync(Byte)
将二进制的数据发送到管道中去,然后从管道里接收二进制的数据回来,并返回是否成功的结果对象。
Send binary data to the pipeline, and then receive binary data back from the pipeline, and return whether the success of the result object
(继承自 BinaryCommunication。)
公共方法ReadFromCoreServerAsync(IEnumerableByte) (继承自 BinaryCommunication。)
公共方法代码示例ReadFromCoreServerAsync(Byte, Boolean, Boolean)
将二进制的数据发送到管道中去,然后从管道里接收二进制的数据回来,并返回是否成功的结果对象。
Send binary data to the pipeline, and then receive binary data back from the pipeline, and return whether the success of the result object
(继承自 BinaryCommunication。)
公共方法ReadFromCoreServerAsync(CommunicationPipe, Byte, Boolean, Boolean)
使用指定的管道来进行数据通信,发送原始数据到管道,然后从管道接收相关的数据返回,本方法无锁
(继承自 BinaryCommunication。)
公共方法SetDtuPipe
将当前的通信对象设置DTU模式,允许传入现成的管道,并返回初始化结果,如果该设备重写了握手报文,就是返回握手结果
Set the current communication object to DTU mode, allow the existing pipe to be passed in, and return the initialization result, if the device rewrites the handshake packet, the handshake result is returned
(继承自 BinaryCommunication。)
公共方法SetDtuPipeAsync
将当前的通信对象设置DTU模式,允许传入现成的管道,并返回初始化结果,如果该设备重写了握手报文,就是返回握手结果
Set the current communication object to DTU mode, allow the existing pipe to be passed in, and return the initialization result, if the device rewrites the handshake packet, the handshake result is returned
(继承自 BinaryCommunication。)
公共方法ToString
Returns a string that represents the current object.
(重写 TcpNetCommunicationToString.)
公共方法UnpackResponseContent
根据对方返回的报文命令,对命令进行基本的拆包,例如各种Modbus协议拆包为统一的核心报文,还支持对报文的验证
According to the message command returned by the other party, the command is basically unpacked, for example, various Modbus protocols are unpacked into a unified core message, and the verification of the message is also supported
(继承自 BinaryCommunication。)
Top
扩展方法
  名称说明
公共扩展器方法ToJsonString
获取当前对象的JSON格式表示的字符串。
Gets the string represented by the JSON format of the current object.
(由 HslExtension 定义。)
Top
参见