SiemensS7Net 方法 |
SiemensS7Net 类型公开以下成员。
名称 | 说明 | |
---|---|---|
AccountCertificate |
认证账号,根据已经设置的用户名和密码,进行发送服务器进行账号认证。 (继承自 NetworkDoubleBase。)Authentication account, according to the user name and password that have been set, sending server for account authentication. | |
AccountCertificateAsync |
认证账号,根据已经设置的用户名和密码,进行发送服务器进行账号认证。 (继承自 NetworkDoubleBase。)Authentication account, according to the user name and password that have been set, sending server for account authentication. | |
BuildBitReadCommand |
生成一个位读取数据指令头的通用方法 ->
A general method for generating a bit-read-Data instruction header
| |
BuildReadCommand |
A general method for generating a command header to read a Word data
| |
BuildWriteBitCommand |
生成一个写入位数据的指令 -> Generate an instruction to write bit data
| |
BuildWriteByteCommand(S7AddressData, Byte, Int32) |
生成一个写入字节数据的指令 -> Generate an instruction to write byte data
| |
BuildWriteByteCommand(S7AddressData, ListByte, Int32) |
生成一个写入字节数据的指令 -> Generate an instruction to write byte data
| |
CancelAllForce |
取消所有强制输出,针对PLC类型为 200smart 时有效 Cancel all forced outputs, effective for PLC type 200smart | |
CheckReceiveDataComplete |
检查当前从网口接收的数据是否是完整的,如果是完整的,则需要返回 True,表示数据接收立即完成,默认返回 True (继承自 NetworkDoubleBase。)Check whether the data currently received from the network port is complete, and if it is complete, you need to return True, indicating that the data reception is completed immediately, and the default value is True | |
CheckRemoteToken |
检查当前的头子节信息的令牌是否是正确的,仅用于某些特殊的协议实现 (继承自 NetworkBase。)Check whether the token of the current header subsection information is correct, only for some special protocol implementations | |
ColdStart |
对PLC进行冷启动,目前仅适用于200smart型号 Cold start for PLC, currently only applicable to 200smart model | |
ColdStartAsync |
对PLC进行冷启动,目前仅适用于200smart型号 Cold start for PLC, currently only applicable to 200smart model | |
ConnectClose |
手动断开与远程服务器的连接,如果当前是长连接模式,那么就会切换到短连接模式 (继承自 NetworkDoubleBase。)Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode | |
ConnectCloseAsync |
手动断开与远程服务器的连接,如果当前是长连接模式,那么就会切换到短连接模式 (继承自 NetworkDoubleBase。)Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode | |
ConnectServer |
尝试连接远程的服务器,如果连接成功,就切换短连接模式到长连接模式,后面的每次请求都共享一个通道,使得通讯速度更快速 (继承自 NetworkDoubleBase。)Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster. | |
ConnectServer(AlienSession) |
使用指定的套接字创建异形客户端,在异形客户端的模式下,网络通道需要被动创建。 (继承自 NetworkDoubleBase。)Use the specified socket to create the alien client. In the alien client mode, the network channel needs to be created passively. | |
ConnectServer(MqttClient, String, String) |
使用一个MQTT中转服务器来连接设备对象,并进行相关的读取操作
(继承自 NetworkDoubleBase。) | |
ConnectServerAsync |
尝试连接远程的服务器,如果连接成功,就切换短连接模式到长连接模式,后面的每次请求都共享一个通道,使得通讯速度更快速 (继承自 NetworkDoubleBase。)Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster. | |
CreateSocketAndConnect(String, Int32) |
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息 (继承自 NetworkBase。)Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number. | |
CreateSocketAndConnect(IPEndPoint, Int32, IPEndPoint) |
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象 (继承自 NetworkBase。)To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object | |
CreateSocketAndConnect(String, Int32, Int32) |
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒 (继承自 NetworkBase。)To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds | |
CreateSocketAndConnectAsync(String, Int32) |
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息 (继承自 NetworkBase。)Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number. | |
CreateSocketAndConnectAsync(IPEndPoint, Int32, IPEndPoint) |
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象 (继承自 NetworkBase。)To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object | |
CreateSocketAndConnectAsync(String, Int32, Int32) |
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒 (继承自 NetworkBase。)To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds | |
DecideWhetherQAMessage |
决定当前的消息是否是应答机制的消息内容,需要在客户端进行重写实现,如果是应答机制,返回 True, 否则返回 False (继承自 NetworkDoubleBase。)To determine whether the current message is the message content of the response mechanism, it needs to be rewritten on the client side. If it is the response mechanism, return True, otherwise return False | |
DeleteFileByName |
删除一个指定的文件,如果文件不存在,直接返回 True,如果文件存在则直接删除,删除成功返回 True,如果发生了异常,返回False (继承自 NetworkBase。)Delete a specified file, if the file does not exist, return True directly, if the file exists, delete it directly, if the deletion is successful, return True, if an exception occurs, return False | |
Dispose |
释放当前的资源,如果调用了本方法,那么该对象再使用的时候,需要重新实例化。 (继承自 NetworkDoubleBase。)Release the current resource. If this method is called, the object needs to be instantiated again when it is used again. | |
Dispose(Boolean) |
释放当前的资源,并自动关闭长连接,如果设置了的话
(继承自 NetworkDoubleBase。) | |
Equals | (继承自 Object。) | |
ExtraAfterReadFromCoreServer |
和服务器交互完成的时候调用的方法,可以根据读写结果进行一些额外的操作,具体的操作需要根据实际的需求来重写实现 (继承自 NetworkDoubleBase。)The method called when the interaction with the server is completed can perform some additional operations based on the read and write results. The specific operations need to be rewritten according to actual needs. | |
ExtraOnDisconnect |
根据实际的协议选择是否重写本方法,有些协议在断开连接之前,需要发送一些报文来关闭当前的网络通道 (继承自 NetworkDoubleBase。)Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting. | |
ExtraOnDisconnectAsync |
根据实际的协议选择是否重写本方法,有些协议在断开连接之前,需要发送一些报文来关闭当前的网络通道 (继承自 NetworkDoubleBase。)Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting. | |
Finalize | (继承自 Object。) | |
ForceBool |
强制输出一个位到指定的地址,针对PLC类型为 200smart 时有效 Force output one bit to the specified address, valid for PLC type 200smart | |
GetAvailableSocket |
获取本次操作的可用的网络通道,如果是短连接,就重新生成一个新的网络通道,如果是长连接,就复用当前的网络通道。 (继承自 NetworkDoubleBase。)Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused. | |
GetAvailableSocketAsync |
获取本次操作的可用的网络通道,如果是短连接,就重新生成一个新的网络通道,如果是长连接,就复用当前的网络通道。 (继承自 NetworkDoubleBase。)Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused. | |
GetHashCode | (继承自 Object。) | |
GetNewNetMessage |
获取一个新的消息对象的方法,需要在继承类里面进行重写 (重写 NetworkDoubleBaseGetNewNetMessage.)The method to get a new message object needs to be overridden in the inheritance class | |
GetPipeSocket |
获取当前用于通信的管道信息 (继承自 NetworkDoubleBase。)Get the current pipe information used for communication | |
GetType | (继承自 Object。) | |
GetWordLength |
一个字单位的数据表示的地址长度,西门子为2,三菱,欧姆龙,modbusTcp就为1,AB PLC无效 (继承自 NetworkDeviceBase。)The address length represented by one word of data, Siemens is 2, Mitsubishi, Omron, modbusTcp is 1, AB PLC is invalid | |
HotStart |
对PLC进行热启动,目前仅适用于200smart型号 Hot start for PLC, currently only applicable to 200smart model | |
HotStartAsync |
对PLC进行热启动,目前仅适用于200smart型号 Hot start for PLC, currently only applicable to 200smart model | |
InitializationOnConnect |
根据实际的协议选择是否重写本方法,有些协议在创建连接之后,需要进行一些初始化的信号握手,才能最终建立网络通道。 (重写 NetworkDoubleBaseInitializationOnConnect(Socket).)Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created. | |
InitializationOnConnectAsync |
根据实际的协议选择是否重写本方法,有些协议在创建连接之后,需要进行一些初始化的信号握手,才能最终建立网络通道。 (重写 NetworkDoubleBaseInitializationOnConnectAsync(Socket).)Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created. | |
IpAddressPing |
对当前设备的IP地址进行PING的操作,返回PING的结果,正常来说,返回Success (继承自 NetworkDoubleBase。)PING the IP address of the current device and return the PING result. Normally, it returns Success | |
MemberwiseClone | (继承自 Object。) | |
PackCommandWithHeader |
对当前的命令进行打包处理,通常是携带命令头内容,标记当前的命令的长度信息,需要进行重写,否则默认不打包 (继承自 NetworkDoubleBase。)The current command is packaged, usually carrying the content of the command header, marking the length of the current command, and it needs to be rewritten, otherwise it is not packaged by default | |
Read(S7AddressData) |
读取西门子的地址数据信息,支持任意个数的数据读取 Read Siemens address data information, support any number of data reading | |
Read(String, UInt16) |
从PLC读取原始的字节数据,地址格式为I100,Q100,DB20.100,M100,长度参数以字节为单位 (重写 NetworkDeviceBaseRead(String, UInt16).)Read the original byte data from the PLC, the address format is I100, Q100, DB20.100, M100, length parameters in bytes | |
Read(String, UInt16) |
一次性从PLC获取所有的数据,按照先后顺序返回一个统一的Buffer,需要按照顺序处理,两个数组长度必须一致,数组长度无限制 One-time from the PLC to obtain all the data, in order to return a unified buffer, need to be processed sequentially, two array length must be consistent | |
ReadT |
读取支持Hsl特性的数据内容,该特性为HslDeviceAddressAttribute,详细参考api文档说明 (继承自 NetworkDeviceBase。)Read the data content of the Hsl attribute. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details. | |
ReadAsync(S7AddressData) |
读取西门子的地址数据信息,支持任意个数的数据读取 Read Siemens address data information, support any number of data reading | |
ReadAsync(String, UInt16) |
从PLC读取原始的字节数据,地址格式为I100,Q100,DB20.100,M100,长度参数以字节为单位 (重写 NetworkDeviceBaseReadAsync(String, UInt16).)Read the original byte data from the PLC, the address format is I100, Q100, DB20.100, M100, length parameters in bytes | |
ReadAsync(String, UInt16) |
一次性从PLC获取所有的数据,按照先后顺序返回一个统一的Buffer,需要按照顺序处理,两个数组长度必须一致,数组长度无限制 One-time from the PLC to obtain all the data, in order to return a unified buffer, need to be processed sequentially, two array length must be consistent | |
ReadAsyncT |
异步读取支持Hsl特性的数据内容,该特性为HslDeviceAddressAttribute,详细参考api文档说明 (继承自 NetworkDeviceBase。)Asynchronously read the data content of the Hsl attribute. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details. | |
ReadBool(String) |
读取指定地址的bool数据,地址格式为I100,M100,Q100,DB20.100 (重写 NetworkDeviceBaseReadBool(String).)reads bool data for the specified address in the format I100,M100,Q100,DB20.100 | |
ReadBool(String, UInt16) |
读取指定地址的bool数组,地址格式为I100,M100,Q100,DB20.100 (重写 NetworkDeviceBaseReadBool(String, UInt16).)reads bool array data for the specified address in the format I100,M100,Q100,DB20.100 | |
ReadBoolAsync(String) |
读取指定地址的bool数据,地址格式为I100,M100,Q100,DB20.100 (重写 NetworkDeviceBaseReadBoolAsync(String).)reads bool data for the specified address in the format I100,M100,Q100,DB20.100 | |
ReadBoolAsync(String, UInt16) |
读取指定地址的bool数组,地址格式为I100,M100,Q100,DB20.100 (重写 NetworkDeviceBaseReadBoolAsync(String, UInt16).)reads bool array data for the specified address in the format I100,M100,Q100,DB20.100 | |
ReadByte |
读取指定地址的byte数据,地址格式I100,M100,Q100,DB20.100 Reads the byte data of the specified address, the address format I100,Q100,DB20.100,M100 | |
ReadByteAsync |
读取指定地址的byte数据,地址格式I100,M100,Q100,DB20.100 Reads the byte data of the specified address, the address format I100,Q100,DB20.100,M100 | |
ReadCustomerT(String) |
读取自定义的数据类型,需要继承自IDataTransfer接口,返回一个新的类型的实例对象。 (继承自 NetworkDeviceBase。)To read a custom data type, you need to inherit from the IDataTransfer interface and return an instance object of a new type. | |
ReadCustomerT(String, T) |
读取自定义的数据类型,需要继承自IDataTransfer接口,传入一个实例,对这个实例进行赋值,并返回该实例的对象。 (继承自 NetworkDeviceBase。)To read a custom data type, you need to inherit from the IDataTransfer interface, pass in an instance, assign a value to this instance, and return the object of the instance. | |
ReadCustomerAsyncT(String) |
读取自定义的数据类型,需要继承自IDataTransfer接口,返回一个新的类型的实例对象。 (继承自 NetworkDeviceBase。)To read a custom data type, you need to inherit from the IDataTransfer interface and return an instance object of a new type. | |
ReadCustomerAsyncT(String, T) |
读取自定义的数据类型,需要继承自IDataTransfer接口,传入一个实例,对这个实例进行赋值,并返回该实例的对象。 (继承自 NetworkDeviceBase。)To read a custom data type, you need to inherit from the IDataTransfer interface, pass in an instance, assign a value to this instance, and return the object of the instance. | |
ReadDate |
从PLC中读取日期格式的数据 Read data in date format from PLC | |
ReadDateAsync |
从PLC中读取日期格式的数据 Read data in date format from PLC | |
ReadDateTime |
从PLC中读取时间格式的数据 Read time format data from PLC | |
ReadDateTimeAsync |
从PLC中读取时间格式的数据 Read time format data from PLC | |
ReadDouble(String) |
读取双浮点的数据 (继承自 NetworkDeviceBase。)Read double floating point data | |
ReadDouble(String, UInt16) |
读取双浮点数据的数组 (继承自 NetworkDeviceBase。)Read double floating point data array | |
ReadDoubleAsync(String) |
异步读取双浮点的数据 (继承自 NetworkDeviceBase。)Asynchronously read double floating point data | |
ReadDoubleAsync(String, UInt16) |
异步读取双浮点数据的数组 (继承自 NetworkDeviceBase。)Asynchronously read double floating point data array | |
ReadDTLDataTime |
从PLC中读取DTL时间格式的数据
| |
ReadDTLDataTimeAsync |
从PLC中读取DTL时间格式的数据
| |
ReadFloat(String) |
读取单浮点数据 (继承自 NetworkDeviceBase。)Read single floating point data | |
ReadFloat(String, UInt16) |
读取单浮点精度的数组 (继承自 NetworkDeviceBase。)Read single floating point array | |
ReadFloatAsync(String) |
异步读取单浮点数据 (继承自 NetworkDeviceBase。)Asynchronously read single floating point data | |
ReadFloatAsync(String, UInt16) |
异步读取单浮点精度的数组 (继承自 NetworkDeviceBase。)Asynchronously read single floating point array | |
ReadFromCoreServer(Byte) |
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。 (继承自 NetworkDoubleBase。)Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe. | |
ReadFromCoreServer(IEnumerableByte) |
将多个数据报文按顺序发到设备,并从设备接收返回的数据内容,然后拼接成一个Byte[]信息,需要重写UnpackResponseContent(Byte, Byte)方法才能返回正确的结果。 (继承自 NetworkDoubleBase。)Send multiple data packets to the device in sequence, and receive the returned data content from the device, and then splicing them into a Byte[] message, you need to rewrite UnpackResponseContent(Byte, Byte) method to return the correct result. | |
ReadFromCoreServer(Byte, Boolean, Boolean) |
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。 (继承自 NetworkDoubleBase。)Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe. | |
ReadFromCoreServer(Socket, Byte, Boolean, Boolean) |
将数据报文发送指定的网络通道上,根据当前指定的INetMessage类型,返回一条完整的数据指令 (重写 NetworkDoubleBaseReadFromCoreServer(Socket, Byte, Boolean, Boolean).)Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type | |
ReadFromCoreServerAsync(Byte) |
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。 (继承自 NetworkDoubleBase。)Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe. | |
ReadFromCoreServerAsync(IEnumerableByte) |
将多个数据报文按顺序发到设备,并从设备接收返回的数据内容,然后拼接成一个Byte[]信息,需要重写UnpackResponseContent(Byte, Byte)方法才能返回正确的结果。 (继承自 NetworkDoubleBase。)Send multiple data packets to the device in sequence, and receive the returned data content from the device, and then splicing them into a Byte[] message, you need to rewrite UnpackResponseContent(Byte, Byte) method to return the correct result. | |
ReadFromCoreServerAsync(Byte, Boolean, Boolean) |
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。 (继承自 NetworkDoubleBase。)Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe. | |
ReadFromCoreServerAsync(Socket, Byte, Boolean, Boolean) |
将数据报文发送指定的网络通道上,根据当前指定的INetMessage类型,返回一条完整的数据指令 (重写 NetworkDoubleBaseReadFromCoreServerAsync(Socket, Byte, Boolean, Boolean).)Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type | |
ReadInt16(String) |
读取16位的有符号的整型数据 (继承自 NetworkDeviceBase。)Read 16-bit signed integer data | |
ReadInt16(String, UInt16) |
读取16位的有符号整型数组 (继承自 NetworkDeviceBase。)Read 16-bit signed integer array | |
ReadInt16Async(String) |
异步读取16位的有符号的整型数据 (继承自 NetworkDeviceBase。)Asynchronously read 16-bit signed integer data | |
ReadInt16Async(String, UInt16) |
异步读取16位的有符号整型数组 (继承自 NetworkDeviceBase。)Asynchronously read 16-bit signed integer array | |
ReadInt32(String) |
读取32位的有符号整型 (继承自 NetworkDeviceBase。)Read 32-bit signed integer | |
ReadInt32(String, UInt16) |
读取32位有符号整型数组 (继承自 NetworkDeviceBase。)Read 32-bit signed integer array | |
ReadInt32Async(String) |
异步读取32位的有符号整型 (继承自 NetworkDeviceBase。)Asynchronously read 32-bit signed integer | |
ReadInt32Async(String, UInt16) |
异步读取32位有符号整型数组 (继承自 NetworkDeviceBase。)Asynchronously read 32-bit signed integer array | |
ReadInt64(String) |
读取64位的有符号整型 (继承自 NetworkDeviceBase。)Read 64-bit signed integer | |
ReadInt64(String, UInt16) |
读取64位的有符号整型数组 (继承自 NetworkDeviceBase。)Read 64-bit signed integer array | |
ReadInt64Async(String) |
异步读取64位的有符号整型 (继承自 NetworkDeviceBase。)Asynchronously read 64-bit signed integer | |
ReadInt64Async(String, UInt16) |
异步读取64位的有符号整型数组 (继承自 NetworkDeviceBase。)Asynchronously read 64-bit signed integer array | |
ReadOrderNumber |
从PLC读取订货号信息 Reading order number information from PLC | |
ReadOrderNumberAsync |
从PLC读取订货号信息 Reading order number information from PLC | |
ReadStream |
读取流中的数据到缓存区,读取的长度需要按照实际的情况来判断 (继承自 NetworkBase。)Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation. | |
ReadStreamAsync |
读取流中的数据到缓存区,读取的长度需要按照实际的情况来判断 (继承自 NetworkBase。)Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation. | |
ReadString(String) |
读取西门子的地址的字符串信息,这个信息是和西门子绑定在一起,长度随西门子的信息动态变化的 Read the Siemens address string information. This information is bound to Siemens and its length changes dynamically with the Siemens information | |
ReadString(String, UInt16) |
读取字符串数据,默认为最常见的ASCII编码 (继承自 NetworkDeviceBase。)Read string data, default is the most common ASCII encoding | |
ReadString(String, Encoding) |
读取西门子的地址的字符串信息,这个信息是和西门子绑定在一起,长度随西门子的信息动态变化的 Read the Siemens address string information. This information is bound to Siemens and its length changes dynamically with the Siemens information | |
ReadString(String, UInt16, Encoding) |
使用指定的编码,读取字符串数据 (重写 NetworkDeviceBaseReadString(String, UInt16, Encoding).)Reads string data using the specified encoding | |
ReadStringAsync(String) |
读取西门子的地址的字符串信息,这个信息是和西门子绑定在一起,长度随西门子的信息动态变化的 Read the Siemens address string information. This information is bound to Siemens and its length changes dynamically with the Siemens information | |
ReadStringAsync(String, UInt16) |
异步读取字符串数据,默认为最常见的ASCII编码 (继承自 NetworkDeviceBase。)Asynchronously read string data, default is the most common ASCII encoding | |
ReadStringAsync(String, Encoding) |
读取西门子的地址的字符串信息,这个信息是和西门子绑定在一起,长度随西门子的信息动态变化的 Read the Siemens address string information. This information is bound to Siemens and its length changes dynamically with the Siemens information | |
ReadStringAsync(String, UInt16, Encoding) |
异步使用指定的编码,读取字符串数据 (重写 NetworkDeviceBaseReadStringAsync(String, UInt16, Encoding).)Asynchronously reads string data using the specified encoding | |
ReadStructT |
读取结构体类型的数据,根据结构体自身的定义,读取原始字节数组,然后解析出实际的结构体数据,结构体需要实现HslStructAttribute特性
(继承自 NetworkDeviceBase。) | |
ReadStructAsyncT |
读取结构体类型的数据,根据结构体自身的定义,读取原始字节数组,然后解析出实际的结构体数据,结构体需要实现HslStructAttribute特性
(继承自 NetworkDeviceBase。) | |
ReadUInt16(String) |
读取16位的无符号整型 (继承自 NetworkDeviceBase。)Read 16-bit unsigned integer | |
ReadUInt16(String, UInt16) |
读取16位的无符号整型数组 (继承自 NetworkDeviceBase。)Read 16-bit unsigned integer array | |
ReadUInt16Async(String) |
异步读取16位的无符号整型 (继承自 NetworkDeviceBase。)Asynchronously read 16-bit unsigned integer | |
ReadUInt16Async(String, UInt16) |
异步读取16位的无符号整型数组 (继承自 NetworkDeviceBase。)Asynchronously read 16-bit unsigned integer array | |
ReadUInt32(String) |
读取32位的无符号整型 (继承自 NetworkDeviceBase。)Read 32-bit unsigned integer | |
ReadUInt32(String, UInt16) |
读取32位的无符号整型数组 (继承自 NetworkDeviceBase。)Read 32-bit unsigned integer array | |
ReadUInt32Async(String) |
异步读取32位的无符号整型 (继承自 NetworkDeviceBase。)Asynchronously read 32-bit unsigned integer | |
ReadUInt32Async(String, UInt16) |
异步读取32位的无符号整型数组 (继承自 NetworkDeviceBase。)Asynchronously read 32-bit unsigned integer array | |
ReadUInt64(String) |
读取64位的无符号整型 (继承自 NetworkDeviceBase。)Read 64-bit unsigned integer | |
ReadUInt64(String, UInt16) |
读取64位的无符号整型的数组 (继承自 NetworkDeviceBase。)Read 64-bit unsigned integer array | |
ReadUInt64Async(String) |
异步读取64位的无符号整型 (继承自 NetworkDeviceBase。)Asynchronously read 64-bit unsigned integer | |
ReadUInt64Async(String, UInt16) |
异步读取64位的无符号整型的数组 (继承自 NetworkDeviceBase。)Asynchronously read 64-bit unsigned integer array | |
ReadWString |
读取西门子的地址的字符串信息,这个信息是和西门子绑定在一起,长度随西门子的信息动态变化的 Read the Siemens address string information. This information is bound to Siemens and its length changes dynamically with the Siemens information | |
ReadWStringAsync |
读取西门子的地址的字符串信息,这个信息是和西门子绑定在一起,长度随西门子的信息动态变化的 Read the Siemens address string information. This information is bound to Siemens and its length changes dynamically with the Siemens information | |
Receive(SslStream, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
Receive(Socket, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
Receive(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
Receive(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveAndCheckBytes |
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends | |
ReceiveAndCheckBytesAsync |
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends | |
ReceiveAsync(SslStream, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveAsync(Socket, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveAsync(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveAsync(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64) |
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据 (继承自 NetworkBase。)Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received. | |
ReceiveByMessage |
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。 (继承自 NetworkBase。)Receive a complete data content, Need to specify a timeout period in milliseconds | |
ReceiveByMessageAsync |
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。 (继承自 NetworkBase。)Receive a complete data content, Need to specify a timeout period in milliseconds | |
ReceiveBytesContentFromSocket |
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends. | |
ReceiveBytesContentFromSocketAsync |
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends. | |
ReceiveCommandLineFromSocket(Socket, Byte, Int32) |
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒 (继承自 NetworkBase。)To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds. | |
ReceiveCommandLineFromSocket(Socket, Byte, Byte, Int32) |
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒 (继承自 NetworkBase。)To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds. | |
ReceiveCommandLineFromSocketAsync(Socket, Byte, Int32) |
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒 (继承自 NetworkBase。)To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds. | |
ReceiveCommandLineFromSocketAsync(Socket, Byte, Byte, Int32) |
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒 (继承自 NetworkBase。)To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds. | |
ReceiveHslMessage |
接收一条hsl协议的数据信息,自动解析,解压,解码操作,获取最后的实际的数据,接收结果依次为暗号,用户码,负载数据 (继承自 NetworkBase。)Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order. | |
ReceiveHslMessageAsync |
接收一条hsl协议的数据信息,自动解析,解压,解码操作,获取最后的实际的数据,接收结果依次为暗号,用户码,负载数据 (继承自 NetworkBase。)Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order. | |
ReceiveMqttFile |
使用MQTT协议从网络接收字节数组,然后写入文件或流中,支持进度报告 (继承自 NetworkBase。)Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report | |
ReceiveMqttFileAsync |
使用MQTT协议从网络接收字节数组,然后写入文件或流中,支持进度报告 (继承自 NetworkBase。)Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report | |
ReceiveMqttMessage(SslStream, Int32, ActionInt64, Int64) |
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据 (继承自 NetworkBase。)Receive a message of a completed MQTT protocol, including control code and payload data | |
ReceiveMqttMessage(Socket, Int32, ActionInt64, Int64) |
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据 (继承自 NetworkBase。)Receive a message of a completed MQTT protocol, including control code and payload data | |
ReceiveMqttMessageAsync(SslStream, Int32, ActionInt64, Int64) |
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据 (继承自 NetworkBase。)Receive a message of a completed MQTT protocol, including control code and payload data | |
ReceiveMqttMessageAsync(Socket, Int32, ActionInt64, Int64) |
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据 (继承自 NetworkBase。)Receive a message of a completed MQTT protocol, including control code and payload data | |
ReceiveMqttStream |
使用MQTT协议从socket接收指定长度的字节数组,然后全部写入到流中,可以指定进度报告 (继承自 NetworkBase。)Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report | |
ReceiveMqttStreamAsync |
使用MQTT协议从socket接收指定长度的字节数组,然后全部写入到流中,可以指定进度报告 (继承自 NetworkBase。)Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report | |
ReceiveRedisCommand |
从网络接收一条完整的redis报文的消息 (继承自 NetworkBase。)Receive a complete redis message from the network | |
ReceiveRedisCommandAsync |
从网络接收一条完整的redis报文的消息 (继承自 NetworkBase。)Receive a complete redis message from the network | |
ReceiveRedisCommandString |
接收一行基于redis协议的字符串的信息,需要指定固定的长度 (继承自 NetworkBase。)Receive a line of information based on the redis protocol string, you need to specify a fixed length | |
ReceiveRedisCommandStringAsync |
接收一行基于redis协议的字符串的信息,需要指定固定的长度 (继承自 NetworkBase。)Receive a line of information based on the redis protocol string, you need to specify a fixed length | |
ReceiveStringArrayContentFromSocket |
[自校验] 从网络中接收一个字符串数组,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends. | |
ReceiveStringArrayContentFromSocketAsync |
[自校验] 从网络中接收一个字符串数组,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends. | |
ReceiveStringContentFromSocket |
[自校验] 从网络中接收一个字符串数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends. | |
ReceiveStringContentFromSocketAsync |
[自校验] 从网络中接收一个字符串数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends. | |
ReceiveVigorMessage |
从Socket接收一条VigorPLC的消息数据信息,指定套接字对象及超时时间 (继承自 NetworkBase。)Receive a message data information of VigorPLC from Socket, specify socket object and timeout time | |
ReceiveVigorMessageAsync |
从Socket接收一条VigorPLC的消息数据信息,指定套接字对象及超时时间 (继承自 NetworkBase。)Receive a message data information of VigorPLC from Socket, specify socket object and timeout time | |
ReceiveWebSocketPayload(SslStream) |
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息 (继承自 NetworkBase。)Receive a complete websocket data from the socket, return the data information of the WebSocketMessage | |
ReceiveWebSocketPayload(Socket) |
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息 (继承自 NetworkBase。)Receive a complete websocket data from the socket, return the data information of the WebSocketMessage | |
ReceiveWebSocketPayloadAsync(SslStream) |
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息 (继承自 NetworkBase。)Receive a complete websocket data from the socket, return the data information of the WebSocketMessage | |
ReceiveWebSocketPayloadAsync(Socket) |
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息 (继承自 NetworkBase。)Receive a complete websocket data from the socket, return the data information of the WebSocketMessage | |
Send(SslStream, Byte) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
Send(Socket, Byte) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
Send(SslStream, Byte, Int32, Int32) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
Send(Socket, Byte, Int32, Int32) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendAccountAndCheckReceive |
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendAccountAndCheckReceiveAsync |
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendAsync(SslStream, Byte) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendAsync(Socket, Byte) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendAsync(SslStream, Byte, Int32, Int32) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendAsync(Socket, Byte, Int32, Int32) |
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。 (继承自 NetworkBase。)Send a message to the socket until it returns when completed. After testing, this method is thread-safe. | |
SendBaseAndCheckReceive |
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendBaseAndCheckReceiveAsync |
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendBytesAndCheckReceive |
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendBytesAndCheckReceiveAsync |
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendMqttFile(Socket, Stream, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken) |
使用MQTT协议将一个数据流发送到网络上去,需要保存的文件名,可选指定文件描述信息,进度报告 (继承自 NetworkBase。)Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report | |
SendMqttFile(Socket, String, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken) |
使用MQTT协议将一个文件发送到网络上去,需要指定文件名,保存的文件名,可选指定文件描述信息,进度报告 (继承自 NetworkBase。)To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report | |
SendMqttFileAsync(Socket, Stream, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken) |
使用MQTT协议将一个数据流发送到网络上去,需要保存的文件名,可选指定文件描述信息,进度报告 (继承自 NetworkBase。)Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report | |
SendMqttFileAsync(Socket, String, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken) |
使用MQTT协议将一个文件发送到网络上去,需要指定文件名,保存的文件名,可选指定文件描述信息,进度报告 (继承自 NetworkBase。)To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report | |
SendMqttStream |
使用MQTT协议将流中的数据读取到字节数组,然后都写入到socket里面,可以指定进度报告,主要用于将文件发送到网络。 (继承自 NetworkBase。)Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network. | |
SendMqttStreamAsync |
使用MQTT协议将流中的数据读取到字节数组,然后都写入到socket里面,可以指定进度报告,主要用于将文件发送到网络。 (继承自 NetworkBase。)Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network. | |
SendStreamToSocket |
发送一个流的所有数据到指定的网络套接字,需要指定发送的数据长度,支持按照百分比的进度报告 (继承自 NetworkBase。)Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage. | |
SendStreamToSocketAsync |
发送一个流的所有数据到指定的网络套接字,需要指定发送的数据长度,支持按照百分比的进度报告 (继承自 NetworkBase。)Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage. | |
SendStringAndCheckReceive(Socket, Int32, String) |
[自校验] 直接发送字符串数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendStringAndCheckReceive(Socket, Int32, String) |
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendStringAndCheckReceiveAsync(Socket, Int32, String) |
[自校验] 直接发送字符串数据并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SendStringAndCheckReceiveAsync(Socket, Int32, String) |
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯 (继承自 NetworkBase。)[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends. | |
SetLoginAccount |
设置当前的登录的账户名和密码信息,并启用账户验证的功能,账户名为空时设置不生效 (继承自 NetworkDoubleBase。)Set the current login account name and password information, and enable the account verification function. The account name setting will not take effect when it is empty | |
SetPersistentConnection |
在读取数据之前可以调用本方法将客户端设置为长连接模式,相当于跳过了ConnectServer的结果验证,对异形客户端无效,当第一次进行通信时再进行创建连接请求。 (继承自 NetworkDoubleBase。)Before reading the data, you can call this method to set the client to the long connection mode, which is equivalent to skipping the result verification of ConnectServer, and it is invalid for the alien client. When the first communication is performed, the connection creation request is performed. | |
SetPipeSocket |
设置一个新的网络管道,一般来说不需要调用本方法,当多个网口设备共用一个网络连接时才需要使用本方法进行设置共享的管道。 (继承自 NetworkDoubleBase。)To set up a new network channel, generally speaking, you do not need to call this method. This method is only needed to set up a shared channel when multiple network port devices share a network connection. | |
Stop |
对PLC进行停止,目前仅适用于200smart型号 Stop the PLC, currently only applicable to the 200smart model | |
StopAsync |
对PLC进行停止,目前仅适用于200smart型号 Stop the PLC, currently only applicable to the 200smart model | |
ToString | (重写 NetworkDeviceBaseToString.) | |
UnpackResponseContent |
根据对方返回的报文命令,对命令进行基本的拆包,例如各种Modbus协议拆包为统一的核心报文,还支持对报文的验证 (继承自 NetworkDoubleBase。)According to the message command returned by the other party, the command is basically unpacked, for example, various Modbus protocols are unpacked into a unified core message, and the verification of the message is also supported | |
Wait(String, Boolean, Int32, Int32) |
等待指定地址的Boolean值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the Boolean value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
Wait(String, Int16, Int32, Int32) |
等待指定地址的Int16值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the Int16 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
Wait(String, Int32, Int32, Int32) |
等待指定地址的Int32值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the Int32 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
Wait(String, Int64, Int32, Int32) |
等待指定地址的Int64值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the Int64 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
Wait(String, UInt16, Int32, Int32) |
等待指定地址的UInt16值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the UInt16 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
Wait(String, UInt32, Int32, Int32) |
等待指定地址的UInt32值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the UInt32 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
Wait(String, UInt64, Int32, Int32) |
等待指定地址的UInt64值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the UInt64 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
WaitAsync(String, Boolean, Int32, Int32) |
等待指定地址的Boolean值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the Boolean value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
WaitAsync(String, Int16, Int32, Int32) |
等待指定地址的Int16值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the Int16 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
WaitAsync(String, Int32, Int32, Int32) |
等待指定地址的Int32值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the Int32 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
WaitAsync(String, Int64, Int32, Int32) |
等待指定地址的Int64值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the Int64 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
WaitAsync(String, UInt16, Int32, Int32) |
等待指定地址的UInt16值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the UInt16 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
WaitAsync(String, UInt32, Int32, Int32) |
等待指定地址的UInt32值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the UInt32 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
WaitAsync(String, UInt64, Int32, Int32) |
等待指定地址的UInt64值为指定的值,可以指定刷新数据的频率,等待的超时时间,如果超时时间为-1的话,则是无期限等待。 (继承自 NetworkDeviceBase。)Waiting for the UInt64 value of the specified address to be the specified value, you can specify the frequency of refreshing the data, and the timeout time to wait. If the timeout time is -1, it is an indefinite wait. | |
Write(String, Double) |
写入double数据,返回是否成功 (继承自 NetworkDeviceBase。)Write double data, return whether the write was successful | |
Write(String, Double) |
写入double数组,返回是否成功 (继承自 NetworkDeviceBase。)Write double array, return whether the write was successful | |
Write(String, Int16) |
写入short数据,返回是否成功 (继承自 NetworkDeviceBase。)Write short data, returns whether success | |
Write(String, Int16) |
写入short数组,返回是否成功 (继承自 NetworkDeviceBase。)Write short array, return whether the write was successful | |
Write(String, Int32) |
写入int数据,返回是否成功 (继承自 NetworkDeviceBase。)Write int data, return whether the write was successful | |
Write(String, Int32) |
写入int[]数组,返回是否成功 (继承自 NetworkDeviceBase。)Write int array, return whether the write was successful | |
Write(String, Int64) |
写入long数据,返回是否成功 (继承自 NetworkDeviceBase。)Write long data, return whether the write was successful | |
Write(String, Int64) |
写入long数组,返回是否成功 (继承自 NetworkDeviceBase。)Write long array, return whether the write was successful | |
Write(String, Single) |
写入float数据,返回是否成功 (继承自 NetworkDeviceBase。)Write float data, return whether the write was successful | |
Write(String, Single) |
写入float数组,返回是否成功 (继承自 NetworkDeviceBase。)Write float array, return whether the write was successful | |
Write(String, String) |
写入字符串信息,编码为ASCII (继承自 NetworkDeviceBase。)Write string information, encoded as ASCII | |
Write(String, UInt16) |
写入ushort数据,返回是否成功 (继承自 NetworkDeviceBase。)Write ushort data, return whether the write was successful | |
Write(String, UInt16) |
写入ushort数组,返回是否成功 (继承自 NetworkDeviceBase。)Write ushort array, return whether the write was successful | |
Write(String, UInt32) |
写入uint数据,返回是否成功 (继承自 NetworkDeviceBase。)Write uint data, return whether the write was successful | |
Write(String, UInt32) |
写入uint[]数组,返回是否成功 (继承自 NetworkDeviceBase。)Write uint array, return whether the write was successful | |
Write(String, UInt64) |
写入ulong数据,返回是否成功 (继承自 NetworkDeviceBase。)Write ulong data, return whether the write was successful | |
Write(String, UInt64) |
写入ulong数组,返回是否成功 (继承自 NetworkDeviceBase。)Write ulong array, return whether the write was successful | |
Write(String, Boolean) |
写入PLC的一个位,例如"M100.6","I100.7","Q100.0","DB20.100.0",如果只写了"M100"默认为"M100.0" (重写 NetworkDeviceBaseWrite(String, Boolean).)Write a bit of PLC, for example "M100.6", "I100.7", "Q100.0", "DB20.100.0", if only write "M100" defaults to "M100.0" | |
Write(String, Boolean) |
[警告] 向PLC中写入bool数组,比如你写入M100,那么data[0]对应M100.0,写入的长度应该小于1600位 (重写 NetworkDeviceBaseWrite(String, Boolean).)[Warn] Write the bool array to the PLC, for example, if you write M100, then data[0] corresponds to M100.0, The length of the write should be less than 1600 bits | |
Write(String, Byte) |
向PLC中写入byte数据,返回值说明 Write byte data to the PLC, return value description | |
Write(String, Byte) |
将数据写入到PLC数据,地址格式为I100,Q100,DB20.100,M100,以字节为单位 (重写 NetworkDeviceBaseWrite(String, Byte).)Writes data to the PLC data, in the address format I100,Q100,DB20.100,M100, in bytes | |
Write(String, DateTime) |
向PLC中写入时间格式的数据 Writes data in time format to the PLC | |
Write(String, ListByte) |
使用离散的方式,同时写入多个数据块到不同的地址中去,但是支持的地址数量及写入数据的最大长度是有限制的,不能超过pdu长度限制。 Using the discrete method, multiple blocks of data are written to different addresses at the same time, but the number of supported addresses and the maximum length of the data written are limited, and cannot exceed the PDU length limit. | |
Write(String, String, Int32) |
写入指定长度的字符串信息,如果超出,就截断字符串,如果长度不足,那就补0操作,编码为ASCII (继承自 NetworkDeviceBase。)Write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, it is filled with 0 and the encoding is ASCII. | |
Write(String, String, Encoding) |
写入字符串信息,需要指定的编码信息 (重写 NetworkDeviceBaseWrite(String, String, Encoding).)Write string information, need to specify the encoding information | |
Write(String, String, Int32, Encoding) |
写入指定长度的字符串信息,如果超出,就截断字符串,如果长度不足,那就补0操作,编码为指定的编码信息 (继承自 NetworkDeviceBase。)Write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, then the operation is complemented with 0 , you should specified the encoding information | |
WriteT(T) |
写入支持Hsl特性的数据,返回是否写入成功,该特性为HslDeviceAddressAttribute,详细参考api文档说明 (继承自 NetworkDeviceBase。)Write data that supports the Hsl attribute, and return whether the write was successful. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details. | |
WriteAsync(String, Double) |
异步写入double数据,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write double data, return whether the write was successful | |
WriteAsync(String, Double) |
异步写入double数组,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write double array, return whether the write was successful | |
WriteAsync(String, Int16) |
异步写入short数据,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write short data, returns whether success | |
WriteAsync(String, Int16) |
异步写入short数组,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write short array, return whether the write was successful | |
WriteAsync(String, Int32) |
异步写入int数据,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write int data, return whether the write was successful | |
WriteAsync(String, Int32) |
异步写入int[]数组,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write int array, return whether the write was successful | |
WriteAsync(String, Int64) |
异步写入long数据,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write long data, return whether the write was successful | |
WriteAsync(String, Int64) |
异步写入long数组,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write long array, return whether the write was successful | |
WriteAsync(String, Single) |
异步写入float数据,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write float data, return whether the write was successful | |
WriteAsync(String, Single) |
异步写入float数组,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write float array, return whether the write was successful | |
WriteAsync(String, String) |
异步写入字符串信息,编码为ASCII (继承自 NetworkDeviceBase。)Asynchronously write string information, encoded as ASCII | |
WriteAsync(String, UInt16) |
异步写入ushort数据,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write ushort data, return whether the write was successful | |
WriteAsync(String, UInt16) |
异步写入ushort数组,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write ushort array, return whether the write was successful | |
WriteAsync(String, UInt32) |
异步写入uint数据,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write uint data, return whether the write was successful | |
WriteAsync(String, UInt32) |
异步写入uint[]数组,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write uint array, return whether the write was successful | |
WriteAsync(String, UInt64) |
异步写入ulong数据,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write ulong data, return whether the write was successful | |
WriteAsync(String, UInt64) |
异步写入ulong数组,返回是否成功 (继承自 NetworkDeviceBase。)Asynchronously write ulong array, return whether the write was successful | |
WriteAsync(String, Boolean) |
写入PLC的一个位,例如"M100.6","I100.7","Q100.0","DB20.100.0",如果只写了"M100"默认为"M100.0" (重写 NetworkDeviceBaseWriteAsync(String, Boolean).)Write a bit of PLC, for example "M100.6", "I100.7", "Q100.0", "DB20.100.0", if only write "M100" defaults to "M100.0" | |
WriteAsync(String, Boolean) |
[警告] 向PLC中写入bool数组,比如你写入M100,那么data[0]对应M100.0,写入的长度应该小于1600位 (重写 NetworkDeviceBaseWriteAsync(String, Boolean).)[Warn] Write the bool array to the PLC, for example, if you write M100, then data[0] corresponds to M100.0, The length of the write should be less than 1600 bits | |
WriteAsync(String, Byte) |
向PLC中写入byte数据,返回值说明 Write byte data to the PLC, return value description | |
WriteAsync(String, Byte) |
将数据写入到PLC数据,地址格式为I100,Q100,DB20.100,M100,以字节为单位 (重写 NetworkDeviceBaseWriteAsync(String, Byte).)Writes data to the PLC data, in the address format I100,Q100,DB20.100,M100, in bytes | |
WriteAsync(String, DateTime) |
向PLC中写入时间格式的数据 Writes data in time format to the PLC | |
WriteAsync(String, ListByte) |
使用离散的方式,同时写入多个数据块到不同的地址中去,但是支持的地址数量及写入数据的最大长度是有限制的,不能超过pdu长度限制。 Using the discrete method, multiple blocks of data are written to different addresses at the same time, but the number of supported addresses and the maximum length of the data written are limited, and cannot exceed the PDU length limit. | |
WriteAsync(String, String, Int32) |
异步写入指定长度的字符串信息,如果超出,就截断字符串,如果长度不足,那就补0操作,编码为ASCII (继承自 NetworkDeviceBase。)Asynchronously write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, it is filled with 0 and the encoding is ASCII. | |
WriteAsync(String, String, Encoding) |
将指定的字符串写入到西门子PLC里面去,将自动添加字符串长度信息,方便PLC识别字符串的内容。 (重写 NetworkDeviceBaseWriteAsync(String, String, Encoding).)Write the specified string into Siemens PLC, and the string length information will be automatically added, which is convenient for PLC to identify the content of the string. | |
WriteAsync(String, String, Int32, Encoding) |
异步写入指定长度的字符串信息,如果超出,就截断字符串,如果长度不足,那就补0操作,编码为指定的编码信息 (继承自 NetworkDeviceBase。)Asynchronously write string information of the specified length. If it exceeds the value, the string is truncated. If the length is not enough, then the operation is complemented with 0 , you should specified the encoding information | |
WriteAsyncT(T) |
异步写入支持Hsl特性的数据,返回是否写入成功,该特性为HslDeviceAddressAttribute,详细参考api文档说明 (继承自 NetworkDeviceBase。)Asynchronously write data that supports the Hsl attribute, and return whether the write was successful. The attribute is HslDeviceAddressAttribute, please refer to the api documentation for details. | |
WriteCustomerT |
写入自定义类型的数据,该类型必须继承自IDataTransfer接口 (继承自 NetworkDeviceBase。)Write data of a custom type, which must inherit from the IDataTransfer interface | |
WriteCustomerAsyncT |
写入自定义类型的数据,该类型必须继承自IDataTransfer接口 (继承自 NetworkDeviceBase。)Write data of a custom type, which must inherit from the IDataTransfer interface | |
WriteDate |
向PLC中写入日期格式的数据,日期格式里只有年,月,日 Write data in date format to PLC, only year, month, day in date format | |
WriteDateAsync |
向PLC中写入日期格式的数据,日期格式里只有年,月,日 Write data in date format to PLC, only year, month, day in date format | |
WriteDTLTime |
向PLC中写入DTL格式的时间数据信息
| |
WriteDTLTimeAsync |
向PLC中写入DTL格式的时间数据信息
| |
WriteStream |
将缓冲区的数据写入到流里面去 (继承自 NetworkBase。)Write the buffer data to the stream | |
WriteStreamAsync |
将缓冲区的数据写入到流里面去 (继承自 NetworkBase。)Write the buffer data to the stream | |
WriteStreamFromSocket |
从套接字中接收所有的数据然后写入到指定的流当中去,需要指定数据的长度,支持按照百分比进行进度报告 (继承自 NetworkBase。)Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage. | |
WriteStreamFromSocketAsync |
从套接字中接收所有的数据然后写入到指定的流当中去,需要指定数据的长度,支持按照百分比进行进度报告 (继承自 NetworkBase。)Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage. | |
WriteWString |
使用双字节编码的方式,将字符串以 Unicode 编码写入到PLC的地址里,可以使用中文。 Use the double-byte encoding method to write the character string to the address of the PLC in Unicode encoding. Chinese can be used. | |
WriteWStringAsync |
使用双字节编码的方式,将字符串以 Unicode 编码写入到PLC的地址里,可以使用中文。 Use the double-byte encoding method to write the character string to the address of the PLC in Unicode encoding. Chinese can be used. |
名称 | 说明 | |
---|---|---|
ToJsonString |
获取当前对象的JSON格式表示的字符串。 (由 HslExtension 定义。)Gets the string represented by the JSON format of the current object. |