点击或拖拽改变大小

YamahaRCX 类

雅马哈机器人的数据访问类
继承层次
SystemObject
  HslCommunication.Core.NetNetworkBase
    HslCommunication.Core.NetNetworkDoubleBase
      HslCommunication.Robot.YAMAHAYamahaRCX

命名空间:  HslCommunication.Robot.YAMAHA
程序集:  HslCommunication (在 HslCommunication.dll 中) 版本:11.8.2.0 (11.8.2.0)
语法
public class YamahaRCX : NetworkDoubleBase

YamahaRCX 类型公开以下成员。

构造函数
  名称说明
公共方法YamahaRCX
实例化一个默认的对象
公共方法YamahaRCX(String, Int32)
指定IP地址和端口来实例化一个对象
Top
属性
  名称说明
公共属性AlienSession
当前的异形连接对象,如果设置了异形连接的话,仅用于异形模式的情况使用
The current alien connection object, if alien connection is set, is only used in the case of alien mode
(继承自 NetworkDoubleBase。)
公共属性代码示例ByteTransform
当前的数据变换机制,当你需要从字节数据转换类型数据的时候需要。
The current data transformation mechanism is required when you need to convert type data from byte data.
(继承自 NetworkDoubleBase。)
公共属性ConnectionId
当前连接的唯一ID号,默认为长度20的guid码加随机数组成,方便列表管理,也可以自己指定
The unique ID number of the current connection. The default is a 20-digit guid code plus a random number.
(继承自 NetworkDoubleBase。)
公共属性代码示例ConnectTimeOut
获取或设置连接的超时时间,单位是毫秒
Gets or sets the timeout for the connection, in milliseconds
(继承自 NetworkDoubleBase。)
公共属性代码示例IpAddress
获取或是设置远程服务器的IP地址,如果是本机测试,那么需要设置为127.0.0.1
Get or set the IP address of the remote server. If it is a local test, then it needs to be set to 127.0.0.1
(继承自 NetworkDoubleBase。)
公共属性LocalBinding
获取或设置绑定的本地的IP地址和端口号信息,如果端口设置为0,代表任何可用的端口
Get or set the bound local IP address and port number information, if the port is set to 0, it means any available port
(继承自 NetworkDoubleBase。)
公共属性代码示例LogNet
组件的日志工具,支持日志记录,只要实例化后,当前网络的基本信息,就以DEBUG等级进行输出
The component's logging tool supports logging. As long as the instantiation of the basic network information, the output will be output at DEBUG
(继承自 NetworkBase。)
公共属性代码示例Port
获取或设置服务器的端口号,具体的值需要取决于对方的配置
Gets or sets the port number of the server. The specific value depends on the configuration of the other party.
(继承自 NetworkDoubleBase。)
公共属性代码示例ReceiveTimeOut
获取或设置接收服务器反馈的时间,如果为负数,则不接收反馈
Gets or sets the time to receive server feedback, and if it is a negative number, does not receive feedback
(继承自 NetworkDoubleBase。)
公共属性SendBeforeHex
获取或设置在发送通信报文前追加发送的字节信息,HEX格式,通常用于lora组网时,需要携带 00 00 00 02 四个字节的站地址功能。
Obtain or set the byte information sent before sending communication packets, HEX format, usually used for LORA networking, you need to carry 00 00 00 02 four-byte station address function.
(继承自 NetworkDoubleBase。)
公共属性SleepTime
获取或设置在正式接收对方返回数据前的时候,需要休息的时间,当设置为0的时候,不需要休息。
Get or set the time required to rest before officially receiving the data from the other party. When it is set to 0, no rest is required.
(继承自 NetworkDoubleBase。)
公共属性SocketKeepAliveTime
获取或设置客户端的Socket的心跳时间信息,这个是Socket底层自动实现的心跳包,不基于协议层实现。默认小于0,不开启心跳检测,如果需要开启,设置 60_000 比较合适,单位毫秒
Get or set the heartbeat time information of the Socket of the client. This is the heartbeat packet automatically implemented by the bottom layer of the Socket, not based on the protocol layer. The default value is less than 0, and heartbeat detection is not enabled. If you need to enable it, it is more appropriate to set 60_000, in milliseconds.
(继承自 NetworkDoubleBase。)
公共属性代码示例Token
网络类的身份令牌,在hsl协议的模式下会有效,在和设备进行通信的时候是无效的
Network-type identity tokens will be valid in the hsl protocol mode and will not be valid when communicating with the device
(继承自 NetworkBase。)
受保护的属性UseServerActivePush
获取或设置当前的连接是否激活从服务器主动推送的功能
(继承自 NetworkDoubleBase。)
Top
方法
  名称说明
受保护的方法AccountCertificate
认证账号,根据已经设置的用户名和密码,进行发送服务器进行账号认证。
Authentication account, according to the user name and password that have been set, sending server for account authentication.
(继承自 NetworkDoubleBase。)
受保护的方法AccountCertificateAsync
认证账号,根据已经设置的用户名和密码,进行发送服务器进行账号认证。
Authentication account, according to the user name and password that have been set, sending server for account authentication.
(继承自 NetworkDoubleBase。)
受保护的方法CheckReceiveDataComplete
检查当前从网口接收的数据是否是完整的,如果是完整的,则需要返回 True,表示数据接收立即完成,默认返回 True
Check whether the data currently received from the network port is complete, and if it is complete, you need to return True, indicating that the data reception is completed immediately, and the default value is True
(继承自 NetworkDoubleBase。)
受保护的方法CheckRemoteToken
检查当前的头子节信息的令牌是否是正确的,仅用于某些特殊的协议实现
Check whether the token of the current header subsection information is correct, only for some special protocol implementations
(继承自 NetworkBase。)
公共方法代码示例ConnectClose
手动断开与远程服务器的连接,如果当前是长连接模式,那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode
(继承自 NetworkDoubleBase。)
公共方法代码示例ConnectCloseAsync
手动断开与远程服务器的连接,如果当前是长连接模式,那么就会切换到短连接模式
Manually disconnect from the remote server, if it is currently in long connection mode, it will switch to short connection mode
(继承自 NetworkDoubleBase。)
公共方法代码示例ConnectServer
尝试连接远程的服务器,如果连接成功,就切换短连接模式到长连接模式,后面的每次请求都共享一个通道,使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.
(继承自 NetworkDoubleBase。)
公共方法代码示例ConnectServer(AlienSession)
使用指定的套接字创建异形客户端,在异形客户端的模式下,网络通道需要被动创建。
Use the specified socket to create the alien client. In the alien client mode, the network channel needs to be created passively.
(继承自 NetworkDoubleBase。)
公共方法ConnectServer(MqttClient, String, String)
使用一个MQTT中转服务器来连接设备对象,并进行相关的读取操作
(继承自 NetworkDoubleBase。)
公共方法代码示例ConnectServerAsync
尝试连接远程的服务器,如果连接成功,就切换短连接模式到长连接模式,后面的每次请求都共享一个通道,使得通讯速度更快速
Try to connect to a remote server. If the connection is successful, switch the short connection mode to the long connection mode. Each subsequent request will share a channel, making the communication speed faster.
(继承自 NetworkDoubleBase。)
受保护的方法代码示例CreateSocketAndConnect(String, Int32)
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnect(IPEndPoint, Int32, IPEndPoint)
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnect(String, Int32, Int32)
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(String, Int32)
创建一个新的socket对象并连接到远程的地址,默认超时时间为10秒钟,需要指定ip地址以及端口号信息
Create a new socket object and connect to the remote address. The default timeout is 10 seconds. You need to specify the IP address and port number.
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(IPEndPoint, Int32, IPEndPoint)
创建一个新的socket对象并连接到远程的地址,需要指定远程终结点,超时时间(单位是毫秒),如果需要绑定本地的IP或是端口,传入 local对象
To create a new socket object and connect to the remote address, you need to specify the remote endpoint, the timeout period (in milliseconds), if you need to bind the local IP or port, pass in the local object
(继承自 NetworkBase。)
受保护的方法代码示例CreateSocketAndConnectAsync(String, Int32, Int32)
创建一个新的socket对象并连接到远程的地址,需要指定ip地址以及端口号信息,还有超时时间,单位是毫秒
To create a new socket object and connect to a remote address, you need to specify the IP address and port number information, and the timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法DecideWhetherQAMessage
决定当前的消息是否是应答机制的消息内容,需要在客户端进行重写实现,如果是应答机制,返回 True, 否则返回 False
To determine whether the current message is the message content of the response mechanism, it needs to be rewritten on the client side. If it is the response mechanism, return True, otherwise return False
(继承自 NetworkDoubleBase。)
受保护的方法DeleteFileByName
删除一个指定的文件,如果文件不存在,直接返回 True,如果文件存在则直接删除,删除成功返回 True,如果发生了异常,返回False
Delete a specified file, if the file does not exist, return True directly, if the file exists, delete it directly, if the deletion is successful, return True, if an exception occurs, return False
(继承自 NetworkBase。)
公共方法Dispose
释放当前的资源,如果调用了本方法,那么该对象再使用的时候,需要重新实例化。
Release the current resource. If this method is called, the object needs to be instantiated again when it is used again.
(继承自 NetworkDoubleBase。)
受保护的方法Dispose(Boolean)
释放当前的资源,并自动关闭长连接,如果设置了的话
(继承自 NetworkDoubleBase。)
公共方法Equals (继承自 Object。)
受保护的方法ExtraAfterReadFromCoreServer
和服务器交互完成的时候调用的方法,可以根据读写结果进行一些额外的操作,具体的操作需要根据实际的需求来重写实现
The method called when the interaction with the server is completed can perform some additional operations based on the read and write results. The specific operations need to be rewritten according to actual needs.
(继承自 NetworkDoubleBase。)
受保护的方法代码示例ExtraOnDisconnect
根据实际的协议选择是否重写本方法,有些协议在断开连接之前,需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.
(继承自 NetworkDoubleBase。)
受保护的方法代码示例ExtraOnDisconnectAsync
根据实际的协议选择是否重写本方法,有些协议在断开连接之前,需要发送一些报文来关闭当前的网络通道
Select whether to rewrite this method according to the actual protocol. Some protocols need to send some packets to close the current network channel before disconnecting.
(继承自 NetworkDoubleBase。)
受保护的方法Finalize (继承自 Object。)
受保护的方法GetAvailableSocket
获取本次操作的可用的网络通道,如果是短连接,就重新生成一个新的网络通道,如果是长连接,就复用当前的网络通道。
Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused.
(继承自 NetworkDoubleBase。)
受保护的方法GetAvailableSocketAsync
获取本次操作的可用的网络通道,如果是短连接,就重新生成一个新的网络通道,如果是长连接,就复用当前的网络通道。
Obtain the available network channels for this operation. If it is a short connection, a new network channel is regenerated. If it is a long connection, the current network channel is reused.
(继承自 NetworkDoubleBase。)
公共方法GetHashCode (继承自 Object。)
受保护的方法GetNewNetMessage
获取一个新的消息对象的方法,需要在继承类里面进行重写
The method to get a new message object needs to be overridden in the inheritance class
(重写 NetworkDoubleBaseGetNewNetMessage.)
公共方法GetPipeSocket
获取当前用于通信的管道信息
Get the current pipe information used for communication
(继承自 NetworkDoubleBase。)
公共方法GetType (继承自 Object。)
受保护的方法代码示例InitializationOnConnect
根据实际的协议选择是否重写本方法,有些协议在创建连接之后,需要进行一些初始化的信号握手,才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.
(继承自 NetworkDoubleBase。)
受保护的方法代码示例InitializationOnConnectAsync
根据实际的协议选择是否重写本方法,有些协议在创建连接之后,需要进行一些初始化的信号握手,才能最终建立网络通道。
Whether to rewrite this method is based on the actual protocol. Some protocols require some initial signal handshake to establish a network channel after the connection is created.
(继承自 NetworkDoubleBase。)
公共方法IpAddressPing
对当前设备的IP地址进行PING的操作,返回PING的结果,正常来说,返回Success
PING the IP address of the current device and return the PING result. Normally, it returns Success
(继承自 NetworkDoubleBase。)
公共方法JogXY
对<机器人编号>指定机器人的指定轴进行手动移动(点动)。<机器人编号>可以省略。当进行省略时,机器人 1 被指定。
公共方法Load
按照优先顺序 p 将指定的程序登录到任务 n 中。已登录程序变为 STOP 状态。
Logs the specified program into task n in order of p. The logged-in program changes to the STOP state.
受保护的方法MemberwiseClone (继承自 Object。)
公共方法PackCommandWithHeader
对当前的命令进行打包处理,通常是携带命令头内容,标记当前的命令的长度信息,需要进行重写,否则默认不打包
The current command is packaged, usually carrying the content of the command header, marking the length of the current command, and it needs to be rewritten, otherwise it is not packaged by default
(继承自 NetworkDoubleBase。)
公共方法ReadCommand
读取指定的命令的方法,需要指定命令,和接收命令的行数信息
The method of reading the specified command requires the specified command and the line number information of the received command
公共方法ReadCommandAsync
读取指定的命令的方法,需要指定命令,和接收命令的行数信息
The method of reading the specified command requires the specified command and the line number information of the received command
公共方法ReadEmergencyStatus
读取紧急停止状态,0 :正常状态、1 :紧急停止状态
Read emergency stop state, 0: normal state, 1: emergency stop state
公共方法ReadEmergencyStatusAsync
读取紧急停止状态,0 :正常状态、1 :紧急停止状态
Read emergency stop state, 0: normal state, 1: emergency stop state
公共方法代码示例ReadFromCoreServer(Byte)
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.
(继承自 NetworkDoubleBase。)
公共方法ReadFromCoreServer(IEnumerableByte) (继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServer(Byte, Boolean, Boolean)
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.
(继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServer(Socket, Byte, Boolean, Boolean)
将数据报文发送指定的网络通道上,根据当前指定的INetMessage类型,返回一条完整的数据指令
Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type
(继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServerAsync(Byte)
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.
(继承自 NetworkDoubleBase。)
公共方法ReadFromCoreServerAsync(IEnumerableByte) (继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServerAsync(Byte, Boolean, Boolean)
将数据发送到当前的网络通道中,并从网络通道中接收一个INetMessage指定的完整的报文,网络通道将根据GetAvailableSocket方法自动获取,本方法是线程安全的。
Send data to the current network channel and receive a complete message specified by INetMessage from the network channel. The network channel will be automatically obtained according to the GetAvailableSocket method This method is thread-safe.
(继承自 NetworkDoubleBase。)
公共方法代码示例ReadFromCoreServerAsync(Socket, Byte, Boolean, Boolean)
将数据报文发送指定的网络通道上,根据当前指定的INetMessage类型,返回一条完整的数据指令
Sends a data message to the specified network channel, and returns a complete data command according to the currently specified INetMessage type
(继承自 NetworkDoubleBase。)
公共方法ReadFromServer
发送命令行到socket, 并从机器人读取指定的命令行
公共方法ReadFromServerAsync
发送命令行到socket, 并从机器人读取指定的命令行
公共方法ReadJoints
读取关节的基本数据信息
Read the basic data information of the joint
公共方法ReadJointsAsync
读取关节的基本数据信息
Read the basic data information of the joint
公共方法ReadModeStatus
读取模式状态
Read mode status
公共方法ReadModeStatusAsync
读取模式状态
Read mode status
公共方法ReadMotorStatus
获取马达电源状态,返回的0:马达电源关闭; 1:马达电源开启; 2:马达电源开启+所有机器人伺服开启
Get the motor power status, return 0: motor power off; 1: motor power on; 2: motor power on + all robot servos on
公共方法ReadMotorStatusAsync
获取马达电源状态,返回的0:马达电源关闭; 1:马达电源开启; 2:马达电源开启+所有机器人伺服开启
Get the motor power status, return 0: motor power off; 1: motor power on; 2: motor power on + all robot servos on
受保护的方法ReadStream
读取流中的数据到缓存区,读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.
(继承自 NetworkBase。)
受保护的方法ReadStreamAsync
读取流中的数据到缓存区,读取的长度需要按照实际的情况来判断
Read the data in the stream to the buffer area. The length of the read needs to be determined according to the actual situation.
(继承自 NetworkBase。)
受保护的方法Receive(SslStream, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(Socket, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法Receive(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAndCheckBytes
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends
(继承自 NetworkBase。)
受保护的方法ReceiveAndCheckBytesAsync
[自校验] 接收一条完整的同步数据,包含头子节和内容字节,基础的数据,如果结果异常,则结束通讯
[Self-checking] Receive a complete synchronization data, including header subsection and content bytes, basic data, if the result is abnormal, the communication ends
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(SslStream, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(Socket, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,接收不大于2048长度的随机数据信息
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(SslStream, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveAsync(Socket, Byte, Int32, Int32, Int32, ActionInt64, Int64)
接收固定长度的字节数组,允许指定超时时间,默认为60秒,当length大于0时,接收固定长度的数据内容,当length小于0时,buffer长度的缓存数据
Receiving a fixed-length byte array, allowing a specified timeout time. The default is 60 seconds. When length is greater than 0, fixed-length data content is received. When length is less than 0, random data information of a length not greater than 2048 is received.
(继承自 NetworkBase。)
受保护的方法ReceiveByMessage
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法ReceiveByMessageAsync
接收一条完整的 数据内容,需要指定超时时间,单位为毫秒。
Receive a complete data content, Need to specify a timeout period in milliseconds
(继承自 NetworkBase。)
受保护的方法ReceiveBytesContentFromSocket
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveBytesContentFromSocketAsync
[自校验] 从网络中接收一串字节数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of byte data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveCommandLineFromSocket(Socket, Byte, Int32)
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.
(继承自 NetworkBase。)
受保护的方法ReceiveCommandLineFromSocket(Socket, Byte, Byte, Int32)
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.
(继承自 NetworkBase。)
受保护的方法ReceiveCommandLineFromSocketAsync(Socket, Byte, Int32)
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.
(继承自 NetworkBase。)
受保护的方法ReceiveCommandLineFromSocketAsync(Socket, Byte, Byte, Int32)
接收一行命令数据,需要自己指定这个结束符,默认超时时间为60秒,也即是60000,单位是毫秒
To receive a line of command data, you need to specify the terminator yourself. The default timeout is 60 seconds, which is 60,000, in milliseconds.
(继承自 NetworkBase。)
受保护的方法ReceiveHslMessage
接收一条hsl协议的数据信息,自动解析,解压,解码操作,获取最后的实际的数据,接收结果依次为暗号,用户码,负载数据
Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order.
(继承自 NetworkBase。)
受保护的方法ReceiveHslMessageAsync
接收一条hsl协议的数据信息,自动解析,解压,解码操作,获取最后的实际的数据,接收结果依次为暗号,用户码,负载数据
Receive a piece of hsl protocol data information, automatically parse, decompress, and decode operations to obtain the last actual data. The result is a opCode, user code, and payload data in order.
(继承自 NetworkBase。)
受保护的方法ReceiveMqttFile
使用MQTT协议从网络接收字节数组,然后写入文件或流中,支持进度报告
Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report
(继承自 NetworkBase。)
受保护的方法ReceiveMqttFileAsync
使用MQTT协议从网络接收字节数组,然后写入文件或流中,支持进度报告
Use MQTT protocol to receive byte array from the network, and then write it to file or stream, support progress report
(继承自 NetworkBase。)
受保护的方法ReceiveMqttMessage(SslStream, Int32, ActionInt64, Int64)
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data
(继承自 NetworkBase。)
受保护的方法ReceiveMqttMessage(Socket, Int32, ActionInt64, Int64)
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data
(继承自 NetworkBase。)
受保护的方法ReceiveMqttMessageAsync(SslStream, Int32, ActionInt64, Int64)
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data
(继承自 NetworkBase。)
受保护的方法ReceiveMqttMessageAsync(Socket, Int32, ActionInt64, Int64)
接收一条完整的MQTT协议的报文信息,包含控制码和负载数据
Receive a message of a completed MQTT protocol, including control code and payload data
(继承自 NetworkBase。)
受保护的方法ReceiveMqttStream
使用MQTT协议从socket接收指定长度的字节数组,然后全部写入到流中,可以指定进度报告
Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report
(继承自 NetworkBase。)
受保护的方法ReceiveMqttStreamAsync
使用MQTT协议从socket接收指定长度的字节数组,然后全部写入到流中,可以指定进度报告
Use the MQTT protocol to receive a byte array of specified length from the socket, and then write all of them to the stream, and you can specify a progress report
(继承自 NetworkBase。)
受保护的方法ReceiveRedisCommand
从网络接收一条完整的redis报文的消息
Receive a complete redis message from the network
(继承自 NetworkBase。)
受保护的方法ReceiveRedisCommandAsync
从网络接收一条完整的redis报文的消息
Receive a complete redis message from the network
(继承自 NetworkBase。)
受保护的方法ReceiveRedisCommandString
接收一行基于redis协议的字符串的信息,需要指定固定的长度
Receive a line of information based on the redis protocol string, you need to specify a fixed length
(继承自 NetworkBase。)
受保护的方法ReceiveRedisCommandStringAsync
接收一行基于redis协议的字符串的信息,需要指定固定的长度
Receive a line of information based on the redis protocol string, you need to specify a fixed length
(继承自 NetworkBase。)
受保护的方法ReceiveStringArrayContentFromSocket
[自校验] 从网络中接收一个字符串数组,如果结果异常,则结束通讯
[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveStringArrayContentFromSocketAsync
[自校验] 从网络中接收一个字符串数组,如果结果异常,则结束通讯
[Self-check] Receive an array of strings from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveStringContentFromSocket
[自校验] 从网络中接收一个字符串数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveStringContentFromSocketAsync
[自校验] 从网络中接收一个字符串数据,如果结果异常,则结束通讯
[Self-checking] Receive a string of data from the network. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法ReceiveVigorMessage
从Socket接收一条VigorPLC的消息数据信息,指定套接字对象及超时时间
Receive a message data information of VigorPLC from Socket, specify socket object and timeout time
(继承自 NetworkBase。)
受保护的方法ReceiveVigorMessageAsync
从Socket接收一条VigorPLC的消息数据信息,指定套接字对象及超时时间
Receive a message data information of VigorPLC from Socket, specify socket object and timeout time
(继承自 NetworkBase。)
受保护的方法ReceiveWebSocketPayload(SslStream)
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage
(继承自 NetworkBase。)
受保护的方法ReceiveWebSocketPayload(Socket)
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage
(继承自 NetworkBase。)
受保护的方法ReceiveWebSocketPayloadAsync(SslStream)
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage
(继承自 NetworkBase。)
受保护的方法ReceiveWebSocketPayloadAsync(Socket)
从socket接收一条完整的websocket数据,返回WebSocketMessage的数据信息
Receive a complete websocket data from the socket, return the data information of the WebSocketMessage
(继承自 NetworkBase。)
公共方法Reset
指定程序复位信息,对所有的程序进行复位。当重新启动了程序时,从主程序或者任务 1 中最后执行的程序开头开始执行。
Specify the program reset information to reset all programs. When the program is restarted, execution starts from the beginning of the main program or the last executed program in task 1.
公共方法ResetAsync
指定程序复位信息,对所有的程序进行复位。当重新启动了程序时,从主程序或者任务 1 中最后执行的程序开头开始执行。
Specify the program reset information to reset all programs. When the program is restarted, execution starts from the beginning of the main program or the last executed program in task 1.
公共方法Run
执行程序运行。执行所有的 RUN 状态程序。
Execute the program to run. Execute all RUN state programs.
公共方法RunAsync
执行程序运行。执行所有的 RUN 状态程序。
Execute the program to run. Execute all RUN state programs.
受保护的方法Send(SslStream, Byte)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法Send(Socket, Byte)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法Send(SslStream, Byte, Int32, Int32)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法Send(Socket, Byte, Int32, Int32)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendAccountAndCheckReceive
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendAccountAndCheckReceiveAsync
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendAsync(SslStream, Byte)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendAsync(Socket, Byte)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendAsync(SslStream, Byte, Int32, Int32)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendAsync(Socket, Byte, Int32, Int32)
发送消息给套接字,直到完成的时候返回,经过测试,本方法是线程安全的。
Send a message to the socket until it returns when completed. After testing, this method is thread-safe.
(继承自 NetworkBase。)
受保护的方法SendBaseAndCheckReceive
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendBaseAndCheckReceiveAsync
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendBytesAndCheckReceive
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendBytesAndCheckReceiveAsync
[自校验] 发送字节数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send the byte data and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendMqttFile(Socket, Stream, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken)
使用MQTT协议将一个数据流发送到网络上去,需要保存的文件名,可选指定文件描述信息,进度报告
Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report
(继承自 NetworkBase。)
受保护的方法SendMqttFile(Socket, String, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken)
使用MQTT协议将一个文件发送到网络上去,需要指定文件名,保存的文件名,可选指定文件描述信息,进度报告
To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report
(继承自 NetworkBase。)
受保护的方法SendMqttFileAsync(Socket, Stream, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken)
使用MQTT协议将一个数据流发送到网络上去,需要保存的文件名,可选指定文件描述信息,进度报告
Use the MQTT protocol to send a data stream to the network, the file name that needs to be saved, optional file description information, progress report
(继承自 NetworkBase。)
受保护的方法SendMqttFileAsync(Socket, String, String, String, ActionInt64, Int64, AesCryptography, HslCancelToken)
使用MQTT协议将一个文件发送到网络上去,需要指定文件名,保存的文件名,可选指定文件描述信息,进度报告
To send a file to the network using the MQTT protocol, you need to specify the file name, the saved file name, optionally specify the file description information, and the progress report
(继承自 NetworkBase。)
受保护的方法SendMqttStream
使用MQTT协议将流中的数据读取到字节数组,然后都写入到socket里面,可以指定进度报告,主要用于将文件发送到网络。
Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network.
(继承自 NetworkBase。)
受保护的方法SendMqttStreamAsync
使用MQTT协议将流中的数据读取到字节数组,然后都写入到socket里面,可以指定进度报告,主要用于将文件发送到网络。
Use the MQTT protocol to read the data in the stream into a byte array, and then write them all into the socket. You can specify a progress report, which is mainly used to send files to the network.
(继承自 NetworkBase。)
受保护的方法SendStreamToSocket
发送一个流的所有数据到指定的网络套接字,需要指定发送的数据长度,支持按照百分比的进度报告
Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage.
(继承自 NetworkBase。)
受保护的方法SendStreamToSocketAsync
发送一个流的所有数据到指定的网络套接字,需要指定发送的数据长度,支持按照百分比的进度报告
Send all the data of a stream to the specified network socket. You need to specify the length of the data to be sent. It supports the progress report in percentage.
(继承自 NetworkBase。)
受保护的方法SendStringAndCheckReceive(Socket, Int32, String)
[自校验] 直接发送字符串数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendStringAndCheckReceive(Socket, Int32, String)
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendStringAndCheckReceiveAsync(Socket, Int32, String)
[自校验] 直接发送字符串数据并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-checking] Send string data directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
受保护的方法SendStringAndCheckReceiveAsync(Socket, Int32, String)
[自校验] 直接发送字符串数组并确认对方接收完成数据,如果结果异常,则结束通讯
[Self-check] Send string array directly and confirm that the other party has received the completed data. If the result is abnormal, the communication ends.
(继承自 NetworkBase。)
公共方法SetLoginAccount
设置当前的登录的账户名和密码信息,并启用账户验证的功能,账户名为空时设置不生效
Set the current login account name and password information, and enable the account verification function. The account name setting will not take effect when it is empty
(继承自 NetworkDoubleBase。)
公共方法代码示例SetPersistentConnection
在读取数据之前可以调用本方法将客户端设置为长连接模式,相当于跳过了ConnectServer的结果验证,对异形客户端无效,当第一次进行通信时再进行创建连接请求。
Before reading the data, you can call this method to set the client to the long connection mode, which is equivalent to skipping the result verification of ConnectServer, and it is invalid for the alien client. When the first communication is performed, the connection creation request is performed.
(继承自 NetworkDoubleBase。)
公共方法SetPipeSocket
设置一个新的网络管道,一般来说不需要调用本方法,当多个网口设备共用一个网络连接时才需要使用本方法进行设置共享的管道。
To set up a new network channel, generally speaking, you do not need to call this method. This method is only needed to set up a shared channel when multiple network port devices share a network connection.
(继承自 NetworkDoubleBase。)
公共方法Stop
执行程序停止。执行所有的 STOP 状态程序。
The execution program stops. Execute all STOP state programs.
公共方法StopAsync
执行程序停止。执行所有的 STOP 状态程序。
The execution program stops. Execute all STOP state programs.
公共方法ToString (继承自 NetworkDoubleBase。)
公共方法UnpackResponseContent
根据对方返回的报文命令,对命令进行基本的拆包,例如各种Modbus协议拆包为统一的核心报文,还支持对报文的验证
According to the message command returned by the other party, the command is basically unpacked, for example, various Modbus protocols are unpacked into a unified core message, and the verification of the message is also supported
(继承自 NetworkDoubleBase。)
受保护的方法WriteStream
将缓冲区的数据写入到流里面去
Write the buffer data to the stream
(继承自 NetworkBase。)
受保护的方法WriteStreamAsync
将缓冲区的数据写入到流里面去
Write the buffer data to the stream
(继承自 NetworkBase。)
受保护的方法WriteStreamFromSocket
从套接字中接收所有的数据然后写入到指定的流当中去,需要指定数据的长度,支持按照百分比进行进度报告
Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage.
(继承自 NetworkBase。)
受保护的方法WriteStreamFromSocketAsync
从套接字中接收所有的数据然后写入到指定的流当中去,需要指定数据的长度,支持按照百分比进行进度报告
Receives all data from the socket and writes it to the specified stream. The length of the data needs to be specified, and progress reporting is supported in percentage.
(继承自 NetworkBase。)
Top
字段
  名称说明
受保护的字段fileCacheSize
文件传输的时候的缓存大小,直接影响传输的速度,值越大,传输速度越快,越占内存,默认为100K大小
The size of the cache during file transfer directly affects the speed of the transfer. The larger the value, the faster the transfer speed and the more memory it takes. The default size is 100K.
(继承自 NetworkBase。)
受保护的字段isPersistentConn
是否是长连接的状态
Whether it is a long connection state
(继承自 NetworkDoubleBase。)
受保护的字段isUseAccountCertificate
是否使用账号登录,这个账户登录的功能是HSL组件创建的服务器特有的功能。
Whether to log in using an account. The function of this account login is a server-specific function created by the HSL component.
(继承自 NetworkDoubleBase。)
受保护的字段LogMsgFormatBinary
设置日志记录报文是否二进制,如果为False,那就使用ASCII码
Set whether the log message is binary, if it is False, then use ASCII code
(继承自 NetworkDoubleBase。)
受保护的字段pipeSocket
当前的网络的管道信息
(继承自 NetworkDoubleBase。)
Top
扩展方法
  名称说明
公共扩展器方法ToJsonString
获取当前对象的JSON格式表示的字符串。
Gets the string represented by the JSON format of the current object.
(由 HslExtension 定义。)
Top
参见